HOME

PRODUCT INFORMATION

ORDER FORM

SUMMARY OF ALL METERS

PRICE LIST

Memo-Chip BL2

click here for BL2-EMC pdf
click here for BL2 Kit

- Programmable Data Logger for

relative humidity,

temperature and GGP 

- Using precision 

RH BluePeg Sensor.

A swift breeze does not cause moisture problems, it is persistent high or low humidity which affects moisture conditions. To keep track, install a Memo-Chip BL2. The data logger collects measurements of relative humidity and temperature over time, which allows a more accurate evaluation of moisture conditions than single readings from hand-held Thermo-Hygrometers.

- From attic and crawl spaces to green houses, 

- From indoor air quality to refrigeration, 

- From water damaged insulation to concrete floors

- Plus job-site surveillance when you are not on site. 

The Memo-Chip BL2 is the perfect tool for general purpose applications around homes, offices and shops or for any industrial application where moisture matters.

The BL2 an be programmed for any job required. Connect the BL2 to the PC and enter time intervalls. Chose the high/low limits and the BL2 is ready to save up to 16000 readings. Sleeves and extensions for in-wall readings are available. Call customer service with your specific needs. 1-800-227-2105.

 

Precision RH BluePeg Sensor

The RH BluePeg sensor uses an accurate and reliable single-chip sensing module. The module is protected by a special filter cap to prohibit dust and chemicals from affecting the accuracy of the sensing module.

Specifications

Sensor: Relative Humidity: 0 to 100%, resolution 0.1%

+/-1.8% for 10-90% ~ +/-3% below 10%, above 90%

Temperature: -300 F to 2000 F, resolution 0.1%

+/-0.5 0 F for 32-1200 F ~ +/-10 F < 320 F% and >1200

Size: 1.75 long and 0.5" diameter

Connector: 3.5 mm stereo jack

For connection use RH Adapter or RH Cable.

Memo-Chip BL2: Datalogger stores up to 16000 sets of temp and relative humidity values. 

LED's indicate out of range status.

Size: 4.5" by 1"diameter, 3.6V Lithium battery 

 

Water Damage Repair

Check RH/Temp during drying. Now you can even measure dryness of insulation behind sheetrock. 

Wood Floors Cupping

Protect precious hardwood floors.  The BL2 can keep track of moisture conditions during acclimation, install- lation and later on.

Optional Ligno-Tec RH meter indicates: RH and Temp, Dew Point Temp

and GPP.

1-800-227-2105

MOISTURE PROBLEMS AND

HELPFUL HINTS

Measuring moisture with relative humidity sensors

Wireless Data Logging with optional Internet Access

 

OTHER LIGNOMAT PRODUCTS

PIN / PINLESS METERS

RH CONCRETE METERS

DRY KILN CONTROL

IN-LINE METERS

LignomatUSA Ltd, PO Box 30145, Portland OR 97294, Tel. 800-227 2105, E-mail: sales@lignomat.com

 

 

 

Moisture Monitor | Rh Measurement Humidity measurement Humidity Measurement RH Values, 

Wireless Moisture Log System | Wireless Moisture Meters | Moisture Data Logger | Wireless Moisture Measurement