A.  

The receiver collects data from 

all transmitters. The data is recorded in adjustable time intervals to  a non-dedicated PC at the job site. Data is recorded, as long as the PC is connected.

If measured values are used for process control, the receiver can be directly connected to the control unit.

B.  

The receiver collects data from 

all transmitters. The data is    recorded in adjustable time intervals in the CMS unit at the job site.

The data can be downloaded

- remote via Cellular, Wi-fi, Ethernet 

C.

Each RHL unit takes readings

from a RH BluePeg sensor in adjustable time intervals.

Data is recorded continuously and can be downloaded wireless to a BlueTooth compatible device any time. A very convenient way to keep track of acclimation and drying, right at the job site.

D.

The receiver collects data from 

all transmitters. The RHL units collect RH/Temp readings. All data is recorded in adjustable time intervals in the CMS unit at the job site.

The data can be downloaded

- remote via Cellular, Wi-fi, Ethernet 

- at the same location by temporarily

  connecting a PC.