Accessories for Lignomat's Pin Moisture Meters                                                                     1-800-227-2105

External Electrodes  

In-Kiln Probes

Click on one of the Electrodes listed below.  Pins, Cables and Cases are listed following the description of each Electrode.

Optimize usage of your Lignomat pin moisture meter with the right electrode. Key factors when choosing an electrode are the required measuring depth and the material to be measured. For core measurements in lumber at least one third of the board thickness has to be penetrated. All of our electrodes are sturdy to allow rough handling. The pins are tapered for easy penetration and made out of hardened steel for maximum strength and low breakage.

Electrode E12

Electrode E10

Electrode E14C

Electrode E16

In-Kiln Probes

Depth measurement in wood,

wood based products,

soft building materials

(drywall, gypsum)

Rugged hammer electrode

for wood and wood based

materials, soft building mat- 

erials, EIFS with EL pins

Inspector electrode

for hard to reach places

wood, wood based pro-

ducts, soft bldg materials

drywall, gypsum, EIFS

Concrete electrode

fast, instant moisture

evaluation in hard bldg

materials such as concretes

brick, tile, etc.

Monitor drying progress

in stacked lumber

kiln or air drying

Measuring depth of pins

1" 1 1/2",  2"

25mm, 37mm or 50mm

all pins are teflonized

Measuring depth of pins

3/16", 7/16", 5/8", 3/4", 7",

5, 10, 15, 20, 175 mm

3/4", 7" pins are teflonized

Measuring depth of pins

3/16", 7/16", 5/8", 3/4", 7"

5, 10, 15, 20, 175 mm 

pins are teflonized

Measuring depth of pins

5/8", 7"

15mm, 175 mm

7" pins are teflonized

Measuring depth of pins

1/2", 3/4", 1", 1.5", 2.8"

12, 19, 25, 38, 70 mm

all pins are teflonized

The above listed external Electrodes and In-Kiln Probes can be connected to the moisture meters listed below.

Mini-Ligno C-Models require BNC-mini Cable or PK-mini Cable.




More advanced Meters

mini-Ligno DX/C

mini-Ligno S/DC

mini-Ligno C and E/C

The mini-Ligno C Models have 2 sockets built-in to connect a cable for an external electrode or in-kiln probes.

The moisture meters listed here plus the older Minimaster and the older H-Series Lignometers have a BNC connector built-in to connect a cable or an Adaptor H for in-kiln probe.

Lignometer K


Lignomat USA Ltd., Portland Oregon USA,   Tel: 503-257-8957,   FAX: 503-255-1430,  E-mail: sales@lignomat.com