Accessories for RH BluePeg Meters                                                                    1-800-227-2105                                                                                                 

  
RH 
BluePeg

1 RH Blue Peg is supplied with each Pro Package.  The RH BluePeg is a sensor for relative humidity and ambient temperature with a protective cover over the sensing pad for calibration stability. 

Readingscan be obtained by connecting:

- RH Cable for probe readings in concrete

- RH Adaptor for ambient air conditions

- RH BluePort for all applications

RH BluePeg Sensor  .........................................     RH-1B    

$75.00  

Convenient and time-saving.

Since multiple test locations are necessary to obtain representative moisture data for each test site, leaving several RH BluePegs inside the sleeves cuts down on waiting time for the sensors to be acclimated.

  
   RH BluePeg Sensor 5 pack  .................................    RH-5B

$375.00

Sleeves 
with Caps 
20 Pack 

10 Sleeves with Caps are supplied with each Pro Package. 
      
The Sleeve is the liner for the test hole, drilled with an 11/16 " concrete drill bit. The Cap deals the opening.

The RH-S20 pack contains 20 sleeves and 20 caps with seal ring.

RH Sleeves 20 pack................................................    RH-20S  

RH Adaptor 

The RH Adaptor can be used for any application where the long 
RH cable becomes cumbersome to manage.  Ideal for measuring ambient conditions of relative humidity and temperature. 

3.5mm male plug on both ends to connect meter to RH BluePeg.

RH Adaptor    ........................................................    RH-A

RH Cable 

1 RH-Cable is supplied with each Pro Package.

Easy-to-use 3.5 mm Plugs to connect and disconnect cable from meter and RH BluePeg Sensor.

RH Cable    ........................................................        RH-C

$20.00

Slide-Hammer Electrode E12 for Ligno-
VersaTec  
- Pin Mode

1 Electrode E12 is supplied with ProPackage V2-1KC. Recommended for the hardwood floor installer, because it is the only tool to check subfloors without removing the floor planks. 

Insulted pins allow obtaining true core readings. Can be used in wood and in soft building materials such as sheetrock or plaster.

Electrode E12, 1 pair each  .............................    DA, DZ pins

$ 97.00

To place an order:  - call  800-227-2105  or  503-257-8957