|
|
|
Description
|
Item |
List
$ |
Special
$ |
|
mini
E/C, 1 pair PKB Probes, 1 PK-mini Cable 6ft
(2m)
|
E-11
|
166.00
|
139.00
|
|
mini
DX/C, 1 pair PKB Probes, 1 PK-mini Cable 6ft
(2m)
|
D-11
|
233.00
|
219.00
|
|
mini
DX/C, 3 pair PKB Probes, 3 PK-mini Cables 12ft
(4m)
|
D-33
|
310.50
|
275.00
|
|
Lignometer
K, E12, Cable, Case, Pulling Tool, 3 pair PKB
Probes,
3
PK-H Cables 18ft (6m)
,
one 4-Station Plate, one
4-Station Switch-Box, 15ft (5m) Teflon-insulated Cable to
connect Switch Box to 4-Station Plate
|
K-33
|
827.50
|
755.00
|
|
Lignometer
K, E12, Cable, Case, Pulling Tool, 6 pair
PKB
Probes,
6
PK-H Cables 18ft (6m)
,
6 angle connectors,
one 12-Position Switch-Box,
200ft (66m) Teflon-insulated
Cabke to connect Switch Box
to Angle Connectors
+
FREE EMC Station
|
K-66
|
1152.00
|
1049.00
|
|
add
1 pair PKB Probes and 1 PK-mini Cable 6ft (2m)
|
KB
|
30.00
|
30.00
|
|
|
|
|
Lignomat
USA Ltd, PO Box 30145, Portland OR 97294, Tel. 800-227 2105, E-mail:
sales@lignomat.com
|
|
Specifications and
Description: Kiln Packages with mini-Ligno DX/C
|
800-227-2105
|
|
|
|
|
Measuring
Range:
|
5-65%
dependent upon species setting* |
|
Resolution:
|
0.1%
for values below 10% and 1% steps above 10%
|
|
Species
Corrections: |
40
settings for wood species corrections with chart for domestic and
tropical species
|
|
Reference
Scale: |
0-99 for non-wood
building materials
|
|
Calibration
Check:
|
The
calibration is internally checked and automatically adjusted if
necessary
|
|
Pins: |
2
pair of pins, measuring depth of 3/16" and 7/16"
(5,10mm)
|
|
Size: |
pocket-size
2 3/4"x 5"x1" (70x140x25mm)
|
|
Weight: |
8
ounces (200g), made out of high-impact plastic
|
|
Accessories: |
wrist
strap and pouch, one 9V battery and 2 pair of pins
|
|
|
|
|
|
|
The
Package D-33 consists
of the mini-Ligno DX/C
3
PK-mini Cables 12ft (4m) long and 3 pair PKB Probes
The
DX/C
is
one of our most popular meters with the following features:
--
a unique shape that fits comfortably in your hand when measuring
-- a measuring range low enough to check hardwood floors (5%*)
-- a measuring range high enough to evaluate wet lumber (65*)
-- a bright, digital display readable even in dark crawl spaces
-- resolution
of 0.1% below the critical range of 10%
--
40 settings for wood species corrections including a chart
for
domestic and tropical
wood species
--
a reference scale 0-99 for non-wood building materials such as
drywall,
plaster and other "soft" building materials.
For
instance, to pinpoint problems around windows or showers,
in leaky ceilings, after water
lines broke or buildings were flooded.
--
connection for external cables and electrode -- to measure wood
moisture
inside a kiln without having to enter the hot kiln.
For
more options see
>> Packages
with mini-Lignos.
The
functionally designed mini-Ligno DX/C fits in your hand when
measuring and is small enough to carry in a shirt-pocket.
The green cap covers
the pins during transportation and serves as a handle when pushing
the pins into the wood. This unique design allows pushing
behind the entire meter to insert the tapered pins easily. Longer pins
are stored inside the meter for measuring thicker material. The short pins are ideal for surface or end cut
readings and for veneer.
For
measurements, push the pins into wood. The unique on-off switch between the pins,
turns meter on automatically and bright LED lights instantly indicate moisture percentage.
An
easy-to-use, reliable instrument.
|
|
|
|
|
|
|
Pins
for mini-Lignos : |
#MA
Pins for a measuring depth of 3/16"................... per pair
#MB
Pins for a measuring depth of 7/16"................... per pair |
$2.70
$3.00 |
|
|
We
use our experience and expertise to manufacture moisture meters
that are consistently reliable and accurate.
Over 220,000 mini-Lignos sold worldwide.
|
|
Lignomat
USA Ltd, PO Box 30145, Portland OR 97294, Tel. 800-227 2105, E-mail:
sales@lignomat.com
|
|
PK
Probes
for
In-Kiln
Readings
|
 |
|
|
|
|
The
insulated PK-Probes are set into pre-drilled holes in the wood about 1
1/4" apart. A pulling Tool #PT is available to place the probes
correctly and to remove the probes easily. At any time the PK-mini
Cable can be connected to the mini-Ligno DX/C to obtain moisture readings.
If the wood temperature inside the kiln is over 850F (30
0C)
the readings need to be temperature corrected using a chart in the
mini-Ligno manual. If using the chart is too cumbersome
the
>>Lignometer K
has temperature corrections built-in.
|
Given
length of probe is measuring depth, dia 1/8" (3mm):
#PKA:
1/2" (12.5mm) long for up to 4/4 or 5/4 lumber, per pair
#PKB:
3/4" (19.5mm) long for up to 6/4 lumber,
per pair
.............
#PKC:
1" (25mm) long for up to 8/4 lumber,
per pair....................
#PKD:
1 1/2" (38mm) long for up to 16/4 lumber
,
per pair
...........
#PKE:
2 3/4" (70mm) long over 16/4 lumber
,
per pair
...................
Pulling
Tool #PT to place and remove PK Probes easily
..............
|
$8.00
$8.50
$9.25
$10.50
$16.50
$25.00
|
|
|
Ideal
for monitoring stacks of lumber during air-drying, in predryers and
kilns or during storage.
The
PK-Probe System has been popular for many years with owners of small
dry kilns as an easy way to reach the center of the load and determine
when the kiln is ready to unload.
|
|
|
|
|
|
|
|
|
Cables |
|
Each PK-mini
Cable connects one pair of PK-Probes to the mini-Ligno DX/C. One split
end of the Cable has 5/34" (2mm) connectors to fit the mini-Ligno
DX/C. The other split end has 5/32" (4mm) plugs to fit the PK Probes:
PK-mini Cable 6 ft (2m) long
..................................................................
PK-mini Cable 12 ft (4m)long
................................................................
|
$25.00
$29.50 |
|
|
|
|
|
|
|
|
|
|
|
To place an order:
- call 800-227-2105 or 503-257-8957
-
send info via E-mail
to:
sales@lignomat.com
- click here for
>Order
Form>, print from screen, fill
out and fax to 503-256-3844 or 503-255-1430
- mail your order
to Lignomat, PO Box 30145, Portland, OR 97294
USA.
|
|
Lignomat
USA Ltd., 14345 NE Morris Ct., Portland OR USA, Tel:
503-257-8957, FAX: 503-255-1430, E-Mail: sales@lignomat.com |
|
