|
|
||||
| |||||||||||||||||
|
1-800-227-2105 |
||
| RH BLUEPEG METERS | ||
| Ligno-Tec RH | ||
|
|
||
| Product Information | ||
Lignomat USA Ltd, PO Box 30145, Portland OR 97294, Tel. 800-227 2105, E-mail: sales@lignomat.com
|
Specifications V-1KM: Ligno-VersaTec, E12, RH BluePeg, 10 RH-S, cables, case |
800-227-2105 |
|||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
The Package V-2M consists of the Ligno-VersaTec, Electrode E12, BNC Cable and the Case M. The Ligno-VersaTec was designed for versatility, reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage. One meter for all your moisture meter needs: Fast
scanning of wood and all flat surfaces of non-wood materials.
Detection of different moisture levels in wood, drywall, concrete,
etc.
Detailed
depth measurements up to 7" deep, where ever the probe can
reach. Works in wood for core readings. Works in all non-wood
materials to indicate where excess moisture is hiding.
RH
BluePeg can be used as a measuring device for ambient relative
humidity and temperature or placed in a measuring sleeve, which
can be inserted into a predrilled hole in the testing area.
Operation
is that easy! Without studying pages and pages of operation
manuals: Depress
SET Button to check settings. Use up or down
buttons to correct settings. Depress % Button for moisture
readings. Instrument
turns itself off automatically. At
any time you can change from pin mode to scan mode by depressing
up or down button.
Professional
Packages and In-Kiln Monitors are available for the Ligno-VersaTec please contact
Customer Service for detailed quotes.
|
|
|
We use our experience and expertise to manufacture moisture meters that are consistently reliable and accurate. |
||
|
Lignomat USA Ltd, PO Box 30145, Portland OR 97294, Tel. 800-227 2105, E-mail: sales@lignomat.com |
|
800-227-2105 |
|
RH BluePeg |
|
The RH BluePeg is a sensor for relative humidity and temperature. Readings can be obtained wirebound with the Ligno-VersaTec. The RH BluePeg conforms to the ASTM F2170 standard test method for determining the RH in concrete floor slabs. RH BluePeg.......................................................................... RH BluePeg 5 pack................................................................ RH Cable for Lignomat Meter.................................................. RH Sleeves 20 Pack............................................................. |
$80.00 $375.00 $25.00 $40.00 |
|||
|
Depth Electrode E12 |
|
The Electrode E12 can be used for wood or soft building materials (drywall, plaster...) to a maximum measuring depth of 2" (50mm). For up to 7" (17.5cm) measuring depth see >>Electrode E16>> The slide hammer is moved up and down to drive the pins in and out of the wood. Teflon-insulated pins measure only between the tips and give core readings even if the surface is wet. The professional tool to obtain true core readings. Ideal for checking sub floors without removing floor boards or measuring fiber boards through stucco or testing structural lumber. |
|
|||
|
Electrode E12, including 1 pair DA pins and 1 pair DZ pins ....................... weight 3.5pds (1600g), length w/o pins 12" (30cm) |
$97.00 |
|||||
|
 |
|||||
|
Teflon-insulated pins for Electrode E12 only: #DZ: Measuring depth 1" (25mm), total length 1 5/8" (42mm) per pair... #DA: Measuring depth 1.5" (37mm), total length 1 5/8" (53mm) per pair #DB: Measuring depth 2" (50mm), total length 2 5/8" (68mm) per pair... |
$3.50 $3.75 $4.00 |
|||||
|
Cable for E12 |
|
The BNC Cable connects the Electrode E12 to the Ligno-DuoTec F or C. The cable has BNC connectors on both ends. Standard cable length is 3 ft (1m), available also 6ft (2m). #BNC Cable (3ft).................................................................. |
$23.00 |
|||
|
E-14C |
 |
-for soft building materials such as drywall, plaster, etc. -for hard building materials such as concrete, masonry, brick, tile Push into soft building materials by hand, or tab on top of electrode to insert pins. Cable is attached to electrode. Weight is 8 ozs, length without pins is 3" Electrode E14C plus Teflon insulated pins: 1 pair EG.................. |
$55.00 |
|||
|
Case |
 |
The black hardshell case has a double wall for sturdiness and a foam insert for protection: For Ligno-DuoTec K or C, Electrode E12 and BNC Cable. (Scanner, Thermo-Hygrometer and/or Electrodes E16 can be added and fit into case M.) Case #M: Size 13"x10"x4" (33x25x10cm) ................................. |
$30.00 |
|||
|
To place an order: - call 800-227-2105 or 503-257-8957 - send info via E-mail to: sales@lignomat.com - click here for >Order Form> , print from screen, fill out and fax to 503-256-3844 or 503-255-1430 - mail your order to Lignomat, PO Box 30145, Portland, OR 97294 USA. |
|
Lignomat USA Ltd., 14345 NE Morris Ct., Portland OR USA, Tel: 503-257-8957, FAX: 503-255-1430, E-Mail: sales@lignomat.com |