Measuring moisture is our expertise. We offer cost efficient, simple solutions to measure moisture . Click here for a moisture meter.

Accessories mini-Lignos

For:
mini-Ligno MD
mini-Ligno E/D
mini-Ligno S/D
mini-Ligno DX

All mini-Lignos come with 2 sets of pins for 3/16″ (5mm) and 7/16″ (10mm) measuring depth. The mini-Ligno moisture meters measure all thicknesses from veneer to 6/4 lumber. For core measurements in thicker wood, a fresh cut is needed.


When cutting the wood is not feasible, choose
mini-Ligno MD/C
mini-Ligno S/DC
mini-Ligno DX/C

and add one of the attachments shown below.


The calibration for all Lignomat mini-Lignos is internally checked and adjusted before each reading. However, calibrations and functions of meter, connection to pins, cables and electrodes can be verified with the Pin Test Block TP. The check block TP works for all Lignomat pin meters including Lignometer H30-HT100.

moisture-meters-pin-mini-Ligno pin-moisture-meter-check-block

mini-Ligno Pins

Pin Calibration Block

2 pair of integral pins are available for mini-Lignos. Both pair of pins are included with each meter. All Lignomat pin meters check calibration internally before each measurement.
Measuring depth of Pins:
#MA: 3/16″ (5mm)
#MB: 7/16″ (10mm)
Check block #TP can be used for all Lignomat pin meters to verify calibration and functionality of meter, cable and electrode.
Price: Price:
$2.70 for #MA Pins
$3.00 for #MB Pins
$32.00 for #TP
.
.

Electrodes for mini-Ligno C-ModelsĀ  – RH Accessories for Ligno-Tec RH meters

moisture-meter-depth-probe-E12 restoration-inspection-moisture moisture-meter-concrete-Eifs in-kiln-monitoring-lumber-stack humidity-RH-temp-concrete-slabs

Depth Electrode E12

Inspector Electrode E14

Concrete Electrode E16

Cables – remote Probes

RH Accessories

For depth measurement in wood, wood-based products and soft building materials (drywall, gypsum) Inspector Electrode: Slim design to measure tight places. Handle can be extended to easily reach ceilings and floors. Fast, instant evaluation of concrete and hard building materials up to 7″ deep. For small pieces and experimental testing. To monitor logs or stacked lumber in a kiln. To monitor critical areas for water damage. For Thermo-Hygrometer For in-situ Probes to measure moisture in concrete slabs.
Pins for: 1″, 1.5″, 2″ deep (25, 37, 50mm) Pins for: 3/16″, 7/16″, 5/8″, 3/4″, 7″ (5, 10, 15, 20, 175mm) Pins for: 3/16″, 7/16″, 5/8″, 3/4″, 7″ (5, 10, 15, 20, 175mm) PK Probes for: 1/2″ to 1.5″, 2.75″, 7″ (1.3 to 3.8 cm, 7, 17.5cm) Compliant with ASTM F2170 standard.
All pins are teflonized. 3/4″ and 7″ are teflonized. 3/4″ and 7″ are teflonized. All pins are teflonized.
To use with: To use with: To use with: To use with: To use with:
mini-Ligno DX/C mini-Ligno DX/C mini-Ligno DX/C mini-Ligno DX/C Ligno-VersaTec
mini-Ligno S/DC mini-Ligno S/DC mini-Ligno S/DC mini-Ligno S/DC Ligno-DuoTec BW
mini-Ligno M/DC mini-Ligno M/DC mini-Ligno M/DC mini-Ligno M/DC Ligno-Tec RH
Ligno-VersaTec Ligno-VersaTec Ligno-VersaTec Ligno-VersaTec
Lignometer K Lignometer K Lignometer K Lignometer K
.

 

 

 

 

To Place An Order

  1. Call 800-227-2105 or 503-257-8957
  2. Send info via email to: sales@lignomat.com
  3. Click here for Order Form Print from screen, fill out and fax to 503-256-3844 or 503-225-1430
  4. Mail your order to: Lignomat, PO Box 30145, Portland, OR 97294 USA