Lignomat moisture meters since 1979. Measuring moisture is our expertise.

Package V-KS

Applications

Before installing resilient floor coverings, the moisture in concrete slabs should be tested to avoid  floor covering failure. The floor covering industry recommends the RH in-situ probe method for concrete moisture testing

Advantages

The versatile, accurate Ligno-VersaTec incorporates multiple functions and delivers absolute reliability for many years of usage. It is your best choice for a pin – pinless – RH combination meter.


The Package V-KS includes the Ligno-VersaTec  and the basic necessities for RH concrete moisture testing. It can be up-graded by adding the Inspector Electrode E14V or the Depth Electrode E12.

The Lignomat RH system complies to the latest ASTM standard. We are committed to up-dating our equipment if needed to any changes suggested by ASTM F2170.

 in-situ-RH-concrete-testing-VM

 

Description . Item List $ Package $
Standard RH Testing Package V-KS:
1 Ligno-Ligno-VersaTec, RH – pin – pinless,
1 RH BluePeg Probe, 1 RH Adapter,
1 RH Cable, 10 Sleeves with caps, 1 Case S
V-KS 624.00 592.00
Package V4-KS:
Standard RH Testing Package V-KS
plus Electrode E14 V4-KS 680.00 646.00
Package V2-KM:
Standard RH Testing Package V-KS
plus Electrode E12 V2-KM 740.00 699.00
5 RH BluePeg Probes  add RH-5B 400.00 375.00
100 pack of sleeves add RH-100S 200.00 170.00
EL pins for depth probing  add EL 29.00 27.00
Click above for spare parts: brush, vacuum attachment, calibration salts, longer sleeves, etc.
…………………………………………………………

 

Moisture Meter: Ligno-VersaTec – pin and pinless and RH
Pin and pinless, dual-depth mode 1/4 ” and 3/4″–Microprocessor-based circuitry assures calibration stability and accuracy for the life-time of the meter. The calibration is internally checked and adjusted before each reading in pin and pinless mode.–Pinless mode allows lower readings in hard woods than pin meters. For a complete list of specs click Ligno-VersaTec meter description.


RH mode for in-situ concrete moisture testing –Meter indicates RH, Temp, DPT, GPP. –The number 134 on the screen is an individual probe number to give the customer an easy way to identify RH BluePeg Probes especially if several probes are in use for testing concrete. Probe numbers rotate through 001-999. –The meter has a HOLD function, to use when the display is not visible during measurements, and to use when scrolling through RH, T, GPP, DPT to obtain correlating sets of values.

precision-hygrometer-VL
Accessories of Package V-KS
Item Qty
RH BluePeg Probes can be connected to the Ligno-VersaTec moisture meter with Adapter H or with RH concrete cable. Complies to accuracy requirements of ASTM F2170. RH-1RB in-situ-RH-concrete-test-1-RB
RH Concrete Cable RH-C cable is used to connect RH BluePeg probe to a RH moisture meter or data logger. The black seal-plug is used during in-situ concrete testing. The plug fits into the sleeve, holds the RH Probe in place during measurements and prohibits air from escaping. The seal-plug also allows disconnecting the cable without removing the probe. RH-CC concrete-moisture-testing-RH-c
RH Adapter The Adapter has 35mm stereo plugs (male) on both ends to connect Lignomat’s RH BluePeg Probe directly to the Ligno-DuoTec BW. RH-A thermo-hygrometer-RH-testing-A
Standard Sleeves Hole liner for RH in-situ concrete moisture testing.  Sleeves and blue caps, length 1.8″ (4.6 cm). Longer sleeves 3″ are available. Cap with rubber seal is very flat as to not disturbe foot traffic during acclimation times. RH-10S 1 concrete-testing-equipment-1.8
Case The black hard-shell case comes with a handle and a foam insert for protection. Designed to fit any Ligno moisture meter with Electrode E12. Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9cm) C-S 1 moisture_meter_case_M
 Add – Optional not included
 The Electrode E12 is equipped with a slide hammer to insert and extract the teflon-coated pins. A BNC connector is mounted at the electrode head to connect the cable. The BNC cable for connecting the Electrode to the moisture meter is included in item E12-B. E12 BNC-C 1 1  Depth-Electrode-pin-meter-E12
 Electrode E14V comes with a 3ft long cable with BNC connector and 1 pair teflon-coated EG pins for 3/4″ measuring depth. Weight 5 oz (140g). Length without pins 6.5″ (16.5cm)
Add – Optional not included
E-14V  1  inspection-moisture-meter-E14V
Add – Optional not included  Item Qty $ List Pkg
RH BluePeg Probes for in-situ concrete test Precision RH Probes with easy-connect 35mm stereo connector. Made for in-situ RH concrete testing with Lignomat’s standard sleeves and 3″ sleeves. Request quote for over 50 probes. RH-5B 1 400.00 380.00 in-situ-RH-test-kit-concrete
Standard Sleeves Hole liner for RH in-situ concrete moisture testing.  RH- 100S 1 200.00 190.00  concrete-testing-equipment-1.8
EL Pins for E14 and E16: teflon-coated, total length 7 3/8″ (18.7cm), measuring depth of 7 1/8″ (18.1cm) EL 1 29.00 27.50 inspection-restoration-EL-pins
Pins for Electrode E12 DZ, DA and DB pins can only be used by Electrode E12. Teflon-coated pins measure only at the tip. depth-moisture-meter-pins-E12
DZ Pins: teflon-coated, total length 1 5/8″ (4.1cm), measuring depth of 1″ (2.5cm) DZ per pair 3.50 3.32
DA Pins: teflon-coated, total length 2 1/2″ (5.4cm), measuring depth of 1 1/2″ ( 3.8cm) DA per pair 3.75 3.56
DB Pins: teflon-coated, total length 2 5/8″ (6.7cm), measuring depth of 2″ (5cm) DB per pair 4.00 3.80
 ………………….

 

RH Measurement and in-situ Probe Accessories Qty Item Price $
Thermo-Hygrometer (optional extension cable) Add RH BluePeg Probe and RH Adapter or RH extension cable to use with as Thermometer with –Ligno-VersaTec — Ligno-DuoTec BW — LignoTec RH –Data logger and wireless transmitter Meters indicate relative humidity, temperature, Dew Point Temperature and Grains per Pound. RH-BluePeg-thermo-hygrometer
1 RH BluePeg Probe and RH Adapter 1 set RH-1BR 99.00
1 RH BluePeg Probe, RH Adapter and RH Cable 1 set RH-1BRC 128.00
RH BluePeg Probes for in-situ concrete test Precision RH Probes with easy-connect 35mm stereo connector. Made for in-situ RH concrete testing with Lignomat’s standard sleeves and 3″ sleeves. Request quote for over 50 probes. in-situ-RH-test-kit-concrete
RH: +/-2% (10-90%), +/-3% below 10%, above 90% T: +/-0.5°F (32-120°F) , +/-1°F (5-32°F and 120-160°F) Resolution for RH and T: 0.1% and 0.1°
1 RH BluePeg Probe (for Concrete test, with red cap) 1 unit RH-1B 80.00
3 RH BluePeg Probes (for Concrete test, with red caps) 3 units RH-3B 228.00
5 RH BluePeg Probes (for Concrete test, with red caps) 5 units RH-5B 380.00
10 RH BluePeg Probes(for Concrete test, with red caps) 10 units RH-100S 735.00
Standard Sleeves Hole liner for RH in-situ concrete moisture testing. concrete-testing-equipment-1.8
If necessary, sleeves can be cut shorter. Top Extenders can be added to seal off the probe. See description below. The lip of the shortened sleeve can still be installed flush with the concrete to form an excellent seal.
Sleeves and blue caps, length 1.8″ (4.6 cm) 20 pack RH-20S 40.00
Sleeves and blue caps, length 1.8″ (4.6 cm) 100 pack RH-100S 190.00
Top Extenders for standard Sleeves The top extenders are needed, when the sleeves have to be shortened and the RH BLuePeg Probes are sticking out above the concrete. The top extender fits into the lip of the sleeve and seals off the RH probe. The blue hood is removed to take readings. concrete-testing-in-situ-RH-ex
Top Extender fits all sleeves (standard and 3″ long). 1 unit RH-1Ex 4.00
Top Extenders fit all sleeves (standard and 3″ long). 5 pack RH-5Ex 15.00
Sleeves 3″ long Hole liner for RH in-situ concrete moisture testing for thick slabs. concrete-testing-equipment-S3
If necessary, the sleeves can be cut shorter than 3″ (7.6 cm). RH Depth Adapter can be added to easily connect cable, when holes are deeper than 2.4″ (6cm). See description below. The lip of the shortened sleeve can still be installed flush with the concrete to form an excellent seal.
Sleeves and blue caps, length 3″ (7.6 cm). 10 pack RH-10SL 29.00
RH Depth Adapter for 3″ Sleeves The 3.5mm stereo connector (male to female) plugs into the RH BLuePeg Probe and elongates the probe to a total of 2″ (5.1cm). This allows for easy cable connection when the RH Probe is in holes over 2.4″ (6.1cm) deep. in-situ-concrete-test-kit-adp
RH Depth Adapter: Length with plug 1.5″ (3.4 cm) 1 unit RH-1DA 1.50
RH Depth Adapter: Length with plug 1.5″ (3.4 cm) 5 pack RH-5DA 6.00
RH-Adapter The 35mm stereo plug (male on both ends) connects RH BluePeg Probe directly to any Lignomat RH meter or the BL2 datalogger. thermo-hygrometer-RH-testing-A
Adapter RH: Length of Adapter with plugs 2″ (5.1cm) 1 RH-A 23.00
RH Concrete Cable RH-C cable is used to connect RH BluePeg probe to a RH moisture meter or data logger. The black seal-plug is used during in-situ concrete testing. The plug fits into the sleeve, holds the RH Probe in place during measurements and prohibits air from escaping. The seal-plug also allows disconnecting the cable without removing the probe. concrete-moisture-testing-RH-c
RH-CC Cable: 3.5mm stereo cable with seal- plug, standard length 6 ft, longer cables upon request. 1 RH-CC 29.00
RH Cable RH-C cable is used to connect RH BluePeg probe to a RH moisture meter or data logger for remote measurements. Ideal for monitoring hard to reach places where moisture may be trapped. humidity-temperature-meter-cbl
RH-C Cable: standard 3.5mm stereo cable, length 6 ft, longer cables upon request. 1 RH-C 23.00
Brush Sturdy brush with rounded tip to clean freshly drilled concrete holes. concrete-moisture-test-brush
Brush will clean up to 5″ (12.7 cm) deep holes. Total length 7.5″ (19 cm) 1 BRS 13.00
Vacuum Attachment Attachment for vacuum hose to clean out holes and sleeves. concrete-moisture-testing-vac
Attachment can reach 3.5″ (8.9 cm) deep. Total length 5 3/4″ (14.6 cm) 1 V 18.00
Calibration Check-Salt-Solution Check solutions are available for 33% and 75% RH. The 75% solution is used to check RH probes for in-situ moisture testing of concrete. Each calibration set includes one cable with seal plug. humidity-calibration-kit-75
75% bottle with 1 cable with seal plug 1 set T-75 55.00
3 75% bottles with 3 cables with seal plugs 3 sets 3T-75 147.00
1 @ 75% and 33% bottle with 2 cables with seal plugs 1 set T-75/33 99.00
Case S Hard-shell case with handle and foam insert for protection. Size: 12″ x 8″ x 3.5″ (30.5 x 20.3 x 9 cm) pin-moisture-meters-cases-S-M
For RH meter and accessories only 1 C-S 27.00
For Ligno-VersaTec, RH accessories, Electrode E14 1 C-S4 27.00
Case M Hard-shell case with handle and foam insert for protection. Size: 13.5″ x 10″ x 3.5″ (35 x 24.5 x 9 cm)
For Ligno-VersaTec, RH accessories, Electrode E12 1 C-M 37.00
For Ligno-VersaTec, RH accessories, Electrode E12, and / or E14 1 C-M4 37.00
Pouch: The pouch comes with a short strap. For any mini-Ligno, Lignometer K or Ligno-VersaTec. For Electrodes E16 and/or E14. However pouch is too small for Electrode E12. Size: 11″ x 6″ x 1.5″ (28 x 15.2 x 3.8 cm) 1 P 10.00 pin-moisture-meters-pouch
…………………………………………………… ….. ………… ……. ………………………………