Lignomat moisture meters since 1979. Measuring moisture is our expertise.
The Electrode E16 is for measuring soft and hard building materials such as drywall, concrete, tile, brick and masonry. Adding the long teflon-coated EL Pins allows inspecting problem areas deep within floors, walls, roofs and ceilings independent of surface moisture. pin-moisture-meters-concrete-6
The advantage of Electrode E16 are the two single pin probes, which are easier to insert into hard material and hard to reach areas than the standard 2-pin electrode. An indispensable tool for building surveillance.
The Electrode E16 gives instant readings when measuring concrete. Even though the measurements are not accurate enough to determine whether or not floor coverings can be installed; measurements detect areas of high moisture content and indicate where further testing is required. measuring-moisture-EIFS-siding
Click here for more info on testing concrete slabs.
The Electrode E16 can also be used to check moisture in small pieces and for experimental testing, because the distance between the pins can be changed. Electrode E16 can be used with the following meters
Ligno-VersaTec
Lignometer K
mini-Ligno DX/C
mini-Ligno S/DC
…………………………………………………………………..
Electrode E16, Pins, Cables and Cases Qty Item Price $
Electrode E16
Used in construction, restoration, building surveillance and the hardwood flooring industry. Tapping on top of probes will drive the pins into the building material. Predrilling holes may be required.
The cable needs to be ordered separately.
Select BNC-E16 or mini-E16 cable to fit your meter.
 moisture-meter-Eifs-Electrode-6
Electrode E16 plus 1 pair EC pins.
Weight 8 oz (260g). Length without pins 3″ (8cm)
 1  E16 35.00
Pins for Electrode E16
EG Pins: teflon-coated, total length 1.1″ (2.8 cm), measuring depth of 3/4″ (1.9 cm) 1 pair EG 4.50 measuring-moisture-pin-meter-4
EL Pins: teflon-coated, total length 7 3/8″ (18.7) cm), measuring depth of 7 1/8″ (18.1 cm) 1 pair EL 29.00
EC Pins: un-coated, total length 15/16″ (2.3 cm), measuring depth of 5/8″ (1.6 cm) 1 pair EC 3.50 wood-pin-moisture-meter-pin-EA
EA Pins: un-coated, total length 3/4″ (1.9 cm), measuring depth of 1/2″ (1.3 cm) 1 pair EA 3.50
EV Pins: un-coated pins, total length 1/2″ (1.3 cm), measuring depth of 3/16″ (5 mm). Used for veneer. 1 pair EV 3.50
mini-E16 Cable
mini-BNC cable connects Electrode E16 to
–mini-Ligno DX/C
–mini-Ligno S/DC
–mini-Ligno MD/C.
moisture-meter-cable-mini-E16
mini-E16 cable, standard length 3 ft 1 m-BNC-3 26.00
mini-E16 cable, standard length 3 ft 1 m-BNC-6 32.00
BNC-E16 Cable
BNC cable connects Electrode E16 to
–Ligno-VersaTec
–Lignometer K
pin-moisture-meter-cable-BNC-6
BNC-E16 cable, standard length 3 ft 1 E16-3 26.00
BNC-E16 cable, length 6 ft 1 E16-6 32.00
Cases: The hardshell case comes with a handle and foam insert for protection. Designed to fit any mini-Ligno, Lignometer K or Ligno-VersaTec with Electrodes listed below. pin-moisture-meters-cases-S-M
Case S for Electrode E16 and/or Electrode E14
Size: 12″ x 8″ x 3.5″ (30.5 x 20.3 x 9 cm)
1 C-S 30.00
Case M for Electrode E12 and/or Electrode E16, E14.
Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9 cm)
1 C-M 37.00
Pouch: The pouch comes with a short strap.
For any mini-Ligno, Lignometer K or Ligno-VersaTec. For Electrodes E16 and/or E14.
However pouch is too small for Electrode E12.
Size: 11″ x 6″ x 1.5″ (28 x 15.2 x 3.8 cm)
1 P 10.00 pin-moisture-meters-pouch
………………………………………………………….. …….. …………. ……….. ……………………………………