Ligno-DuoTec BW Moisture Meter
The Ligno-DuoTec BW moisture meter can be used as:
– dual-depth, pinless Meter
– RH Precision Thermo-Hygrometer
– RH Concrete Testing
Accurate, sturdy, small and handy
with large display indicating
-Wood moisture percentage
-Wood species setting
Add RH BluePeg Probe
to use the Ligno-DuoTec BW as a
Indicates RH / T / DPT / GPP.
Add RH BluePeg Probe and sleeves
to use Ligno-DuoTec BW for
in-situ RH concrete moisture test.
Package B-KS includes the Ligno-DuoTec BW pinless moisture meter and the basic necessities for RH concrete testing.
The Ligno-DuoTec BW is a non-invasive moisture meter with dual-depth measuring capabilities. Lignomat’s unique dual-depth moisture meters allow the user to have more versatility. Two moisture meters in one. Great for thinner and thicker boards, engineered floor planks, and waterborne finishes. In addition the RH BluePeg Probe can be added and used as a Thermo-Hygrometer or for RH in-situ probe testing of concrete following the latest ASTM F2170 standard.
For Contractors, Restoration Specialists, Floor Covering Installers and Inspectors.
Multi-function Moisture Meter:
Wood in Scan Mode: Ligno-DuoTec BW gives wood moisture readings in percent. Wood corrections are built-in for a measuring depth of 1/4″ and for 3/4″ for 70 specific gravity settings. Included are 9 different settings for bamboo.
Building Materials in Scan Mode: The Ligno-DuoTec BW gives moisture content in percent for drywall. However for concrete and light-weight building materials comparative readings can be taken to evaluate moisture conditions and find wet spots. Again 1/4″ and 3/4″ measuring depth are available. Conforms to ASTM 2659.
Air in RH Mode: Add RH BluePeg Probe for ambient relative humidity and temperature, GPP and DPT. Moisture meter also used as a Thermo-Hygrometer.
Concrete in RH Mode: Add RH BluePeg Probes and RH accessories for in-situ moisture testing of concrete. Conforms to ASTM F2170. BW-KS package
|Moisture Meters||Item||List $||Package $|
dual-depth, pinless, RH Meter (meter only)
BW meter and RH-Thermo-Hygrometer
BW meter and RH concrete test Kit
|Ligno-VersaTec, pin-pinless-RH, meter only||V-0||435.00||–|
|Ligno-Scanner SDM, 1/4″, 3/4″, pinless meter for wood, bamboo, drywall, concrete, etc||SDM||308.00||–|
|Ligno-DuoTec BW Moisture Meter|
|5-60% dependent upon species setting*|
|Display||0.1% resolution for the entire range.|
|71 wood group settings, or simply use the specific gravity of the wood, between 0.3 and 1.0 ( setting 30-100)Settings for horizontal, vertical and strand bamboo|
|Measuring Depth||Dual depth measuring capabilities at 1/4″ and 3/4″|
|0-99 for non-wood building materials3 reference scales for wood-based products, concrete based materials, standard building materials|
||Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary.|
|Calibration Check||External calibration check block #TS is available to verify the calibration and functions of meter.|
|Included||Pouch, one 9V battery, manual and laminated wood group chart.|
|Size||Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″|
|Weight||8 ounces (200g), made out of high-impact plastic|
|Warranty||All moisture meters have a 2 year warranty. Pins and battery are excluded.|
RH BluePeg Probe compliant with latest ASTM F2170 standard
|RH BluePeg Probe|
|RH Measurements||±2% for 10-90%+
±3% for 0-10% and > 90%
|Temperature Measurements||±0.5°F for 32°F to 120°F+
±1°F less 32°F to 5°F+
±1°F above 120°F to 160°F
|Display||0.1% resolution for the entire range.|
|Calibration||All RH BluePegs are NIST certified|
|Standard Sleeve||Following ASTM-F2170 for a 4 inch slab we offer sleeves and caps at 1.8 inches. If longer sleeves are desired we also offer 3.0″ sleeves that can be shortened to desired lengths.|
|Calibration Check||During the first year, Lignomat will test the calibration of the RH BluePeg probes three times without a charge. To check the calibration we offer calibration check salts. T-75 and T-75/33|
|Included||Ligno-DuoTec BW, RH BluePeg sensor, 10 1.8 inch sleeves and caps, RH adapter for ambient conditions, RH cable with seal plug and small hard-shell carrying case|
|Size||12″ X 8″ X 3.5″|
|Warranty||All moisture meters have a 2 year warranty. RH sensor has a 1 year warranty and battery are excluded.|
The Package BW-1KS consists of the LignoDuoTec BW, RH BluePeg, RH cable, 10 RH Sleeves and caps and the Case S. The Ligno-DuoTec BW was designed for reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage.
Fast scanning of all flat surfaces of non-wood materials. Detection of different moisture levels in drywall, concrete, etc. RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a predrilled hole in the testing area. Operation is that easy! Without studying pages and pages of operation manuals: Depress SET Button to check settings. Use up or down buttons to select correct setting. Depress % Button for moisture readings. Instrument turns itself off automatically.
At any time you can change from pin mode to scan mode by depressing up or down button. For more information on the Ligno-DuoTec BW please contact Customer Service for detailed quotes.