Lignomat moisture meters have proven measuring technology which guarantees long-term accuracy. Family owned and operated for over 40 years. 

Ligno-Tec RH Concrete Moisture Meter

  • The LignTec RH is one of three
    RH meters from Lignomat.
    It can be used for:

    – RH Precision Thermo-Hygrometer
    – RH Concrete Testing

  • The LignTec RH is one of three
    RH meters from Lignomat.
    It can be used for:

    – RH Precision Thermo-Hygrometer
    – RH Concrete Testing

  • Add RH BluePeg Probe and sleeves
    to use LignoTec RH for
    in-situ RH concrete moisture test.

  • Package T-1KS includes the LignoTec RH moisture meter and the basic necessities for RH concrete testing.

Other Info:

Special Prices
thru April 15, 2022. Now is a good time to buy!

Ligno-Tec RH Concrete Moisture Meter

The Ligno-Tec RH concrete moisture meter for contractors, floor covering installers and restoration specialists is easy to use and affordable. The meter can be used as a Thermo-Hygrometer or for in-depth moisture testing of concrete following ASTM F2170-11 RH in-situ probe test. Moisture meter indicates relative humidity, temperature, GPP and DPT.

Thermo-Hygrometer: If you are looking for an accurate Hygrometer, the Ligno-Tec RH concrete moisture meter with RH BluePeg probe should be your choice. The RH BluePeg probe uses a hi-accuracy sensor with a short acclimation time. The RH BluePeg probe can be connected with a small Adapter directly to the meter. For extended reach, a cable up to 50ft long can be added. All cables have easy-to-connect and fail-proof 35mm stereo connectors.

In-situ probe concrete testing: Lignomat has designed the RH BluePeg Probe, sleeves, cable and RH concrete moisture meter for a simple and fail-proof measuring procedure.

The RH BluePeg probe drops easily into the sleeve. The cap fits perfectly and is as flat as can be. The 3.5mm stereo connector can be easily connected. No pin alignment of the cable needs to be fitted. Plug in and read, that’s what our customers like. All Lignomat RH equipment complies to the latest ASTM F2170 standard for RH in-situ probe method.

 

– More info on in-situ probe testing
– More info on Lignomats RH system

– Video on RH in-situ probe method

Other Options:

Moisture Meters Item List $ Package $
Thermo-Hygrometer RH-B:
1 Ligno-Tec RH meter,
1 RH BluePeg Probe, 1 RH Adapter		 RH-B 378.00 359.00
Concrete Package RH-KS:
RH meter, RH concrete test Kit, Case small		 RH-KS 464.00 440.00
Ligno-VersaTec, pin-pinless-RH, meter only V-0 435.00 –
Ligno-Scanner SDM, 1/4″, 3/4″, pinless for wood, bamboo, drywall, concrete, etc SDM 308.00 –

 

RH Measurements ±2% for 10-90%+ ±3% for 0-10% and > 90%
Temperature Measurements ±0.5°F for 32°F to 120°F+ ±1°F less 32°F to 5°F+ ±1°F above 120°F to 160°F
Display 0.1% resolution for the entire range
Calibration All RH BluePegs are NIST certified
Standard Sleeve Following ASTM-F2170 for a 4 inch slab we offer sleeves and caps at 1.8 inches. If longer sleeves are desired we also offer 3.0″ sleeves that can be shortened to desired lengths
Calibration Check During the first year, Lignomat will test the calibration of the RH BluePeg probes three times without a charge. To check the calibration we offer calibration check salts. T-75 and T-75/33
Included Ligno-DuoTec BW, RH BluePeg sensor, 10 1.8 inch sleeves and caps, RH adapter for ambient conditions, RH cable with seal plug and small hard-shell carrying case
Size 12″ X 8″ X 3.5″
Weight 3 lbs
Warranty All moisture meters have a 2 year warranty. RH sensor has a 1 year warranty and battery are excluded

The Package T-1KP consists of the LignoTec RH, RH BluePeg, RH cable, 10 RH Sleeves and caps and a carrying pouch. The Ligno-Tec RH was designed for reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage.

RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a predrilled hole in the testing area. Operation is that easy! Without studying pages and pages of operation manuals: Depress SET Button to check settings. Use up or down buttons to correct settings. Depress % Button for moisture readings. Instrument turns itself off automatically.

At any time you can change from pin mode to scan mode by depressing up or down button.

For more information on the Ligno-Tec RH measuring system please contact Customer Service at 1-800-227-2105.