Lignomat moisture meters have proven measuring technology which guarantees long-term accuracy. Family owned and operated for over 40 years. 

Ligno-VersaTec Moisture Meter

  • VersaTec combines Lignomat’s  proven measuring technologies

    Pin and Pinless (dual-depth)
    RH Precision Thermo-Hygrometer
    RH Concrete Testing

  • wood-V-pinless-moisture-meter
    Wood, engineered floors, bamboo…
  • To optimize usage of a
    Ligno-VersaTec meter:

    Add Pin Electrodes
    • Add RH Probe to use as Hygrometer.
    • Add RH Kit for concrete testing.

  • Use precision Thermo-Hygrometer (1-99%) for inspection and restoration:

    Indicates RH, Temp, GPP, DPT.

  • Add RH BluePeg Probes and Sleeves for in-situ RH concrete testing.

Other Info:

Special Prices
thru April 15, 2022.
Now is a good time to buy!

Ligno-VersaTec Moisture Meter

Ligno-VersaTec: Pin – Pinless – RH

Ligno-VersaTec combo meter uses Lignomats accurate and dependable buffermeasuring technologies. Great pin, pinless and RH meter for wood, bamboo, gypsum, concrete and other non-wood building materials. Everybody needing a versatile, accurate meter will appreciate the multiple functions and the reliability of the Ligno-VersaTec. For all industries where moisture measurements are and integral part of every day decision making. For instance, the Lign-VersaTec can be used for rough estimates high and low moisture levels. However, the meter also provides precise moisture percentages for a wide variety of wood species and other materials. Various electrodes are available for taking measurements up to 7″ deep.

With this combo meter you can choose the right measuring mode and the right accessories for the job on hand. It can be tracking moisture problems with a pin electrode or measuring humidity in a crawl space.

Floor installers check a cupped floor using the dual-depth pinless mode. Once trouble areas are found switch to pin mode to pinpoint the problem. In addition, pinless search and compare mode is used when tracking moisture problems in walls, ceilings and floors. Lumber processing mills use the meter to make sure QC requirements are followed.

Pin and pinless side by side:

Large areas are scanned fast and easy. Selectable measuring depth 1/4″ or 3/4″ allows user to compare moisture close to the surface and deeper down. Once a problem is detected, pin electrodes are used for further investigations.

RH mode:

Add RH BluePeg humidity probe to the Ligno-VersaTec and you have a precision thermo-hygrometer for RH, T, GPP, DPT. Add RH concrete accessories to perform in-situ moisture tests in concrete. RH BluePeg system complies with latest ASTM F-2170 standard.

Other Options:


Moisture Meters Item List $ Package $
Package V-B: Ligno-VersaTec,
RH Probe, RH Adapter (Thermo-Hygrometer)
V-B 530.00 499.00
Package V-4S: Ligno-VersaTec, E-14,
Case S
V-4S 528.00 497.00
Package V2-KM: Ligno-VersaTec,
RH concrete accessories,
Depth Electrode E12, Cable, Case M
V2-KM 785.00 758.00
(meter only, for pinless measurements)
V-0 435.00
Properties Pin Mode Pinless.Mode…………….
Moisture Range 5-99% * 5-60%*
Resolution 0.1% for entire measuring range same as pin meter
Measuring Depth Up to 2″ use E12 (5cm) Up to 7″ use E14. E16 (17.5cm) 1/4 and 3/4″ deep 7 and 20mm
Wood Species Corrections over 125 individualized settings same as pin meter
Wood Temperature Corrections 0°F to 210°F -10°C to 95°C not necessary
Reference Scale 0-99 for non-wood building materials 3 sensitivity levels wood, concrete, other materials
Calibration The calibration is internally checked before each reading and auto- matically adjusted if needed. Test blocks available. same as pin meter
Battery one 9V battery
Size 2.5″x 4.75″ x 1″ (60x120x25mm)
Weight 8 ounces (200g), made out of high-impact plastic
Electrodes Electrode or PK Probe required no attachments necessary


Properties RH Mode with RH BluePeg Probe
Relative Humidity ±2% for 10 to 90% ±3% for 0 to 10% and >90%Resolution for entire range is 0.1%
Temperature ±0.5°F for 32°F to 120°F           (±1°C for 0°C to 50°C) ±1°F below 32°F down to 5°F    (±1.6°C below 0°C to -15°C) ±1°F above 120°F up to 160°F  (±1.6°C above 50°C to 70°C)Resolution for entire range is 0.1°F (0.1°C)
Size Ø 1.3cm, length 3.8cm
Connector Easy-to-connect 3.5mm stereo connection
Calibration Calibration Salts for 33 and 75% RH available

* measuring range depends on wood species settings.    * moisture readings above fiber saturation point 25-30% are less accurate.           * pinless meters can read lower moisture values in hardwood.       Using RH probes in concrete is the ASTM approved method to test concrete before installing any type of floor covering. Lignomat’s RH BluePeg fits inside the sleeve, and can be left until the test is finished, then removed and reused. RH Range: 0-99%, Temp: 0 to 200 degrees F or -15 to 95 degrees C. The Package V-2M consists of the Ligno-VersaTec, Electrode E12, BNC Cable and the Case M. The Ligno-VersaTec was designed for versatility, reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage. One meter for all your moisture meter needs:

– Fast scanning of wood and all flat surfaces of non-wood
–   materials. Detection of different moisture levels in wood,
–   drywall, concrete, etc.
– Detailed depth measurements up to 7″ deep, where ever the probe
–   can reach. Works in wood for core readings. Works in all
–   non-wood materials to indicate where excess moisture is hiding.
– RH BluePeg can be used as a measuring device for ambient
–   relative humidity and temperature or placed in a measuring
–   sleeve, which can be inserted into a predrilled hole in the testing
–   area.
– Operation is that easy! Without studying pages and pages of
   operation manuals: Depress SET Button to check settings. Use
 –  up or down buttons to correct settings.
– Depress % Button for moisture readings. Instrument turns itself
–   off automatically. At any time you can change from pin mode to
–   scan mode by depressing up or down button.
– Professional Packages and In-Kiln Monitors are available for the
–   Ligno-VersaTec please contact Customer Service for detailed
–   quotes.