Pin Moisture Meter Accessories

Accessories
	For mini-Ligno MD/C, mini-Ligno S/DC, mini-Ligno DX/C For Lignometer K, Ligno-VersaTec		For Ligno-Tec RH For Ligno-DuoTec BW and Ligno-VersaTec
Electrodes Pin Meters	Optimize usage of your moisture meter with one of Lignomat’s electrodes. Key factors material to be measured and measuring depth. Pins are made for easy penetration, maximum strength and low breakage.	Accessories RH Meters	For use as Thermo-Hygrometer and in-situ RH testing in concrete. Accessories include RH BluePeg probe, cable, adapter, sleeves, cleaning brush, vacuum attachment, calibration salts.
Pins and Cables	Select the electrode you are using or want to purchase. Available cables and pins are listed following the description of each electrode.	Calibration RH	RH Probes and RH meter: Calibration Check Salts are available to check RH Probes and RH meter function.
	Each mini-Ligno comes with two pair of pins for a measuring depth of 3/16″ and 7/16″.
Calibration Pin/Pinless	The calibration of Lignomat’s pin and pinless meters is checked and adjusted internally automatically, before each measurement. If a calibration check is needed, functions of pin meter, cable and electrode can be verified with test blocks TP (pin). For pinless meters use test block TS (pinless).	Scroll down to view mini-Ligno pins and calibration check blocks and salts.
	…………………………………………………………………………		……………………………………………………………….


Depth Electrode E12	Inspector Electrode E14	Concrete Electrode E16	Cables – remote Probes	RH Accessories
For depth measurement in wood, wood-based products and soft building materials (drywall, gypsum)	Inspector Electrode: Slim design to measure tight places. Handle can be extended to easily reach ceilings and floors.	Fast, instant evaluation of concrete and hard building materials up to 7″ deep. For small pieces and experimental testing.	To monitor logs or stacked lumber in a kiln. To monitor critical areas for water damage.	For Thermo-Hygrometer For in-situ Probes to measure moisture in concrete slabs.
Pins for: 1″, 1.5″, 2″ deep (25, 37, 50mm)	Pins for: 3/16″, 7/16″, 5/8″, 3/4″, 7″ (5, 10, 15, 20, 175mm)	Pins for: 3/16″, 7/16″, 5/8″, 3/4″, 7″ (5, 10, 15, 20, 175mm)	PK Probes for: 1/2″ to 1.5″, 2.75″, 7″ (1.3 to 3.8 cm, 7.3cm)	Compliant with ASTM F2170 standard.
All pins are teflonized.	3/4″ and 7″ are teflonized.	3/4″ and 7″ are teflonized.	All pins are teflonized.
To use with:	To use with:	To use with:	To use with:	To use with:
mini-Ligno DX/C	mini-Ligno DX/C	mini-Ligno DX/C	mini-Ligno DX/C	Ligno-VersaTec
mini-Ligno S/DC	mini-Ligno S/DC	mini-Ligno S/DC	mini-Ligno S/DC	Ligno-DuoTec BW
mini-Ligno M/DC	mini-Ligno M/DC	mini-Ligno M/DC	mini-Ligno M/DC	Ligno-Tec RH
Ligno-VersaTec	Ligno-VersaTec	Ligno-VersaTec	Ligno-VersaTec
Lignometer K	Lignometer K	Lignometer K	Lignometer K
.

Calibration Blocks and Salts – mini-Ligno Pins

Calibration Salt RH	Pinless Calibration Block	Pin Calibration Block	mini-Ligno Pins
Calibration Check Salts can be used to check accuracy of relative humidity probes. Available for 75% and 33%.	All Lignomat pinless meters check calibration internally before each measurement.	All Lignomat pin meters check calibration internally before each measurement.	2 pair of integral pins are available for mini-Lignos. Both pair of pins are included with each meter.
All Lignomat RH meters with RH BluePeg Probes use the same calibration check salts to verify accuracy and functionality.	Check block #TS can be used for all Lignomat pinless meters to verify calibration for 1/4″ and 3/4″ measuring depth.	Check block #TP can be used for all Lignomat pin meters to verify calibration and functionality of meter, cable and electrode.	Measuring depth of Pins: #MA: 3/16″ (5mm) #MB: 7/16″ (10mm)

Accessories