|Thermo-Hygrometer: moisture meters and data loggers listed below can be used as Thermo-Hygrometers by connecting the RH BluePeg Probe. The meters indicate RH, Temp, Dew Point Temp, and GPP. For a short connection a handy Adapter is available. For remote measurements cables up to 50 ft long are available. Standard length supplied is 6ft.
Concrete in-situ RH Moisture Testing: Lignomats RH BluePeg system is designed to measure moisture in concrete complying with ASTM standard F2170. The unique system uses reusable, removable RH BluePeg probes for multiple testing. RH Probes, sleeves, cables and meters allow for a fast, simple and fail-proof test procedure. The only non-reusable parts are the sleeves.
|Handheld Meters / Data Loggers||RH/Temp||pinless||pin|
|Transmitter T, RH, MC||Wireless||ϒ||ϒ|
|RH Measurement and in-situ Probe Accessories
| Thermo-Hygrometer (optional extension cable)
Add RH BluePeg Probe and RH Adapter or RH extension cable to use with as Thermometer with
–Ligno-VersaTec — Ligno-DuoTec BW — LignoTec RH
–Data logger and wireless transmitter
Meters indicate relative humidity, temperature,
Dew Point Temperature and Grains per Pound.
|1 RH BluePeg Probe and RH Adapter||1 set||RH-BA||99.00|
|1 RH BluePeg Probe, RH Adapter and RH Cable||1 set||RH-BC||128.00|
| RH BluePeg Probes for in-situ concrete test
Precision RH Probes with easy-connect 35mm stereo connector. Made for in-situ RH concrete testing with Lignomat’s standard sleeves and 3″ sleeves.
Request quote for over 50 probes.
|RH: +/-2% (10-90%), +/-3% below 10%, above 90%
T: +/-0.5°F (32-120°F) , +/-1°F (5-32°F and 120-160°F)
Resolution for RH and T: 0.1% and 0.1°
|1 RH BluePeg Probe (for Concrete test, with red cap)||1 unit||RH-1BP||80.00.00|
|3 RH BluePeg Probes (with red caps)||3 units||RH-3BP||225.50|
|5 RH BluePeg Probes (with red caps)||5 units||RH-5BP||365.00|
|10 RH BluePeg Probes (with red caps)||10 units||RH-10BP||699.00|
Hole liner for RH in-situ concrete moisture testing.
|If necessary, sleeves can be cut shorter.
Top Extenders can be added to seal off the probe. See description below. The lip of the shortened sleeve can still be installed flush with the concrete to form an excellent seal.
|Sleeves and blue caps, length 1.8″ (4.6 cm)||20 pcs||RH-20S||40.00|
|Sleeves and blue caps, length 1.8″ (4.6 cm)||100 pcs||RH-100S||170.00|
|Top Extenders for standard Sleeves
The top extenders are needed, when the sleeves have to be shortened and the RH BLuePeg Probes are sticking out above the concrete. The top extender fits into the lip of the sleeve and seals off the RH probe. The blue hood is removed to take readings.
|Top Extender fits all sleeves (standard and 3″ long).||1 unit||RH-1Ex||4.00|
|Top Extenders fit all sleeves (standard and 3″ long).||5 pcs||RH-5Ex||15.00|
|Sleeves 3″ long
Hole liner for RH in-situ concrete moisture testing for thick slabs.
|If necessary, the sleeves can be cut shorter than 3″ (7.6 cm). RH Depth Adapter can be added to easily connect cable, when holes are deeper than 2.4″ (6cm). See description below. The lip of the shortened sleeve can still be installed flush with the concrete to form an excellent seal.|
|Sleeves and blue caps, length 3″ (7.6 cm).||10 pcs||RH-10SL||29.00|
|RH Depth Adapter for 3″ Sleeves
The 3.5mm stereo connector (male to female) plugs into the RH BLuePeg Probe and elongates the probe to a total of 2″ (5.1cm). This allows for easy cable connection when the RH Probe is in holes over 2.4″ (6.1cm) deep.
|RH Depth Adapter: Length with plug 1.5″ (3.4 cm)||1 unit||RH-1DA||2.00|
|RH Depth Adapter: Length with plug 1.5″ (3.4 cm)||5 pcs||RH-5DA||8.00|
The 35mm stereo plug (male on both ends) connects RH BluePeg Probe directly to any Lignomat RH meter or the BL2 datalogger.
|Adapter RH: Length of Adapter with plugs 2″ (5.1cm)||1||RH-A||15.00|
|RH Concrete Cable
RH-C cable is used to connect RH BluePeg probe to a RH moisture meter or data logger. The black seal-plug is used during in-situ concrete testing. The plug fits into the sleeve, holds the RH Probe in place during measurements and prohibits air from escaping. The seal-plug also allows disconnecting the cable without removing the probe.
|RH-CC Cable: 3.5mm stereo cable with seal- plug, standard length 6 ft, longer cables upon request.||1||RH-CC||24.00|
RH-C cable is used to connect RH BluePeg probe to a RH moisture meter or data logger for remote measurements. Ideal for monitoring hard to reach places where moisture may be trapped.
|RH-C Cable: standard 3.5mm stereo cable,
length 6 ft, longer cables upon request.
Sturdy brush with rounded tip to clean freshly drilled concrete holes.
|Brush will clean up to 5″ (12.7 cm) deep holes.
Total length 7.5″ (19 cm)
Attachment for vacuum hose to clean out holes and sleeves.
|Attachment can reach 3.5″ (8.9 cm) deep.
Total length 5 3/4″ (14.6 cm)
Check solutions are available for 33% and 75% RH. The 75% solution is used to check RH probes for in-situ moisture testing of concrete. Each calibration set includes one cable with seal plug.
|75% bottle with 1 cable with seal plug||1 set||T-75||49.00|
|3 75% bottles with 3 cables with seal plugs||3 sets||3T-75||147.00|
|1 @ 75% and 33% bottle with 2 cables with seal plugs||1 set||T-75/33||85.00|
Hard-shell case with handle and foam insert for protection. Size: 12″ x 8″ x 3.5″ (30.5 x 20.3 x 9 cm)
|For RH meter and accessories only||1||C-S||30.00|
|For Ligno-VersaTec, RH accessories, Electrode E14||1||C-S4||30.00|
Hard-shell case with handle and foam insert for protection. Size: 13.5″ x 10″ x 3.5″ (35 x 24.5 x 9 cm)
|For Ligno-VersaTec, RH accessories, Electrode E12||1||C-M||37.00|
|For Ligno-VersaTec, RH accessories, Electrode E12, and / or E14||1||C-M4||37.00|
| Pouch: The pouch comes with a short strap.
For any mini-Ligno, Lignometer K or Ligno-VersaTec. For Electrodes E16 and/or E14.
However pouch is too small for Electrode E12.
Size: 11″ x 6″ x 1.5″ (28 x 15.2 x 3.8 cm)