Package BW-B |
|
Ligno-DuoTec BW: Multi-Function moisture meter 3 in 1We recommend the Ligno DuoTec BW multi function moisture meter for the floor covering industry, furniture production, restoration and lastly building maintenance. The BW is the meter for all applications where moisture content and relative humidity need to be measured. With the BW-B package you are able to use the dual depth pinless moisture meter plus the RH BluePeg which contains a high precision sensor for accurate measurements for ambient conditions. ApplicationsTo keep close tabs on moisture in wood and humidity in air during production, flooring installations, inspections and water damage repairs. Package BW-B has it all. AdvantagesOne meter for 2 important tasks. Measures wood in percent, quick and easy with dual-depth selection for 1/4″ and 3/4″ deep. Ideal for engineered products and a wide range of building materials. Measures relative humidity and temperature, DPT and GPP using Lignomat’s RH BluePeg probe. The precision RH BluePeg probe gives this thermo-hygrometer great accuracy and a short response time. The RH BluePeg Probe fits in Lignomat’s sleeve for in-situ probe testing in concrete. Options |
|
- Choose the Ligno-VersaTec, if you are looking for a pin and pinless meter.
| Description | Item | List $ | Sale $ | |||||||
| Thermometer Package BW-B consists of: 1 Ligno-DuoTec BW, pinless, dual-depth moisture meter 1 RH BluePeg Probe, 1 RH Adapter |
BW-B | 468.00 | 399.00 | |||||||
| RH extension cable, standard length 6 ft Available up to 50 ft long, price dependent on length of cable |
add | RH-C | 23.00 | – | ||||||
| Pouch | add | P | 10.00 | 9.50 | ||||||
| Concrete Test Package: Ligno DuoTec BW & Concrete accessories | BW-KS | 547.00 | 489.00 | |||||||
| Ligno-DuoTec BW, meter only | BW | 365.00 | 325.00 | |||||||
| Ligno-VersaTec, meter only | V-0 | 435.00 | 399.00 | |||||||
| …………………………………………………………………………………………………… | ||||||||||
| Moisture Meter: Ligno-DuoTec BW – pinless and RH | |||||
| Pinless, dual-depth mode 1/4 ” and 3/4″ deep –Microprocessor-based circuitry assures calibration stability and —accuracy for the life-time of the meter. The calibration is internally —checked and adjusted before each reading in pin and pinless mode. –Pinless mode allows lower readings in hard woods than pin. For more specs go back to BW meter description. ———————————————————————– RH mode –Meter indicates RH, Temp, DPT, GPP. –The number 134 on the screen is an individual probe number to give the customer an easy way to identify RH BluePeg Probes especially if several probes are in use for testing concrete. Probe numbers rotate through 001-999. –The meter has a HOLD function, to use when the display is not visible during measurements, and to use when scrolling through RH, T, GPP, DPT to obtain correlating sets of values. |
 |
||||
| Accessories of Package BW-B |
Item | Qty | |||
| RH BluePeg Probes can be connected to the Ligno-DuoTec BW meter with Adapter H or with RH cable. Response time 8 sec. | RH-1BP | 1 |  |
||
| RH: +/-2% (10-90%), +/-3% below 10%, above 90% T: +/- 0.5°F (32-120°F) , +/- 1°F (5-32°F and 120-160°F) Response time 8 sec. Resolution for RH and T: 0.1% and 0.1° |
|||||
| RH Adapter The Adapter has 35mm stereo plugs (male) on both ends to connect Lignomat’s RH BluePeg Probe directly to the Ligno-DuoTec BW. |
RH-A | 1 |  |
||
| Add – Optional not included | Item | Qty | List $ | Pkg | |
| RH Cable is used for remote measurements. Ideal for monitoring hard to reach places where moisture may be trapped.RH-C Cable: standard 3.5mm stereo cable, length 6 ft, longer cables upon request. | RH-C | 1 | 23.00 | 21.85 |  |
| Pouch comes with a short strap. For Ligno-DuoTec BW, probe and cable. Size: 11″ x 6″ x 1.5″ (28 x 15.2 x 3.8 cm) |
P | 1 | 10.00 | 9.50 |  |
| …………………. | |||||
| Spare Parts for Package BW-B | Item | Qty | List $ | ||
| RH BluePeg Probes can be connected to the Ligno-DuoTec BW meter with Adapter H or with RH cable. Response time 8 sec. | RH-1BP | 1 | 80.00 | |
|
| RH: +/-2% (10-90%), +/-3% below 10%, above 90% T: +/- 0.5°F (32-120°F) , +/- 1°F (5-32°F and 120-160°F) Response time 8 sec. Resolution for RH and T: 0.1% and 0.1° |
|||||
| RH Adapter The Adapter has 35mm stereo plugs (male) on both ends to connect Lignomat’s RH BluePeg Probe directly to the Ligno-DuoTec BW. |
RH-A | 1 | 23.00 | |
|
| RH Cable is used for remote measurements. Ideal for monitoring hard to reach places where moisture may be trapped.RH-C Cable: standard 3.5mm stereo cable, length 6 ft, longer cables upon request. | RH-C | 1 | 23.00 | |
|
| ………………. | |||||