Before installing resilient floor coverings, the moisture in concrete slabs should be tested to avoid floor covering failure. The floor covering industry recommends the RH in-situ probe method for concrete moisture testing.
The dual-mode Ligno-DuoTec BW incorporates pinless, dual depth and RH functions. The BW delivers absolute reliability for many years of usage. It is your best choice for a pinless – RH combination meter.
The Package BW-KS includes the Ligno-DuoTec BW pinless moisture meter and the basic necessities for RH concrete testing.
The Lignomat RH system complies to the latest ASTM standard. We are committed to up-dating our equipment if needed to any changes suggested by ASTM F2170.
- Choose the Ligno-VersaTec, if you are looking for a pin-pinless-RH combination meter.
|Description||.||Item||List $||Package $|
|Standard RH Testing Package BW-KS:
1 Ligno-DuoTec BW, RH – pinless
1 RH BluePeg Probe, 1 RH Adapter, 1 RH Cable,
10 Sleeves with caps, 1 Case S
|5 RH BluePeg Probes||add||RH-5BP||400.00||365.00|
|100 pack of sleeves||add||RH-100S||200.00||170.00|
|click above for spare parts: brush, vacuum attachment, calibration salts, longer sleeves, etc.|
|Moisture Meter: Ligno-DuoTec BW – pinless and RH|
|Pinless, dual-depth mode 1/4 ” and 3/4″ deep
–Microprocessor-based circuitry assures calibration stability and
—accuracy for the life-time of the meter. The calibration is internally checked —and adjusted before each reading in pin and pinless mode.
–Pinless mode allows lower readings in hard woods than pin meters. For —more specs go back to BW meter description.
|Accessories of Package BW-KS
|RH BluePeg Probes can be connected to the Ligno-Ligno-DuoTec BW moisture meter with Adapter H or with RH concrete cable. Complies to accuracy requirements of ASTM F2170.||RH-1BP||1|
|RH Concrete Cable
RH-C cable is used to connect RH BluePeg probe to a RH moisture meter or data logger. The black seal-plug is used during in-situ concrete testing. The plug fits into the sleeve, holds the RH Probe in place during measurements and prohibits air from escaping. The seal-plug also allows disconnecting the cable without removing the probe.
The Adapter has 35mm stereo plugs (male) on both ends to connect Lignomat’s RH BluePeg Probe directly to the Ligno-DuoTec BW.
Hole liner for RH in-situ concrete moisture testing. Sleeves and blue caps, length 1.8″ (4.6 cm). Longer sleeves 3″ are available. Cap with rubber seal is very flat as to not disturbe foot traffic during acclimation times.
The black hard-shell case comes with a handle and a foam insert for protection. Designed to fit any Ligno moisture meter with Electrode E12.
Size: 12″ x 8″ x 3.5″ (30.5 x 20.3 x 9 cm)
|Add – Optional not included||Item||Qty||List $||Pkg|
|RH BluePeg Probes for in-situ concrete test
Precision RH Probes with easy-connect 35mm stereo connector. Made for in-situ RH concrete testing with Lignomat’s standard sleeves and 3″ sleeves.
Request quote for over 50 probes.
Hole liner for RH in-situ concrete moisture testing.
|RH Measurement and in-situ Probe Accessories||Qty||Item||Price $|
|Thermo-Hygrometer (optional extension cable) Add RH BluePeg Probe and RH Adapter or RH extension cable to use with as Thermometer with –Ligno-VersaTec — Ligno-DuoTec BW — LignoTec RH –Data logger and wireless transmitter Meters indicate relative humidity, temperature, Dew Point Temperature and Grains per Pound.|
|1 RH BluePeg Probe and RH Adapter||1 set||RH-1BR||99.00|
|1 RH BluePeg Probe, RH Adapter and RH Cable||1 set||RH-1BRC||128.00|
|RH BluePeg Probes for in-situ concrete test Precision RH Probes with easy-connect 35mm stereo connector. Made for in-situ RH concrete testing with Lignomat’s standard sleeves and 3″ sleeves. Request quote for over 50 probes.|
|RH: +/-2% (10-90%), +/-3% below 10%, above 90% T: +/-0.5°F (32-120°F) , +/-1°F (5-32°F and 120-160°F) Resolution for RH and T: 0.1% and 0.1°|
|1 RH BluePeg Probe (for Concrete test, with red cap)||1 unit||RH-1B||80.00|
|3 RH BluePeg Probes (for Concrete test, with red caps)||3 units||RH-3B||240.00|
|5 RH BluePeg Probes (for Concrete test, with red caps)||5 units||RH-5B||400.00|
|10 RH BluePeg Probes(for Concrete test, with red caps)||10 units||RH-10B||800.00|
|Standard Sleeves Hole liner for RH in-situ concrete moisture testing.|
|If necessary, sleeves can be cut shorter. Top Extenders can be added to seal off the probe. See description below. The lip of the shortened sleeve can still be installed flush with the concrete to form an excellent seal.|
|Sleeves and blue caps, length 1.8″ (4.6 cm)||20 pack||RH-20S||40.00|
|Sleeves and blue caps, length 1.8″ (4.6 cm)||100 pack||RH-100S||200.00|
|Top Extenders for standard Sleeves The top extenders are needed, when the sleeves have to be shortened and the RH BLuePeg Probes are sticking out above the concrete. The top extender fits into the lip of the sleeve and seals off the RH probe. The blue hood is removed to take readings.|
|Top Extender fits all sleeves (standard and 3″ long).||1 unit||RH-1Ex||4.00|
|Top Extenders fit all sleeves (standard and 3″ long).||5 pack||RH-5Ex||15.00|
|Sleeves 3″ long Hole liner for RH in-situ concrete moisture testing for thick slabs.|
|If necessary, the sleeves can be cut shorter than 3″ (7.6 cm). RH Depth Adapter can be added to easily connect cable, when holes are deeper than 2.4″ (6cm). See description below. The lip of the shortened sleeve can still be installed flush with the concrete to form an excellent seal.|
|Sleeves and blue caps, length 3″ (7.6 cm).||10 pack||RH-10SL||29.00|
|RH Depth Adapter for 3″ Sleeves The 3.5mm stereo connector (male to female) plugs into the RH BLuePeg Probe and elongates the probe to a total of 2″ (5.1cm). This allows for easy cable connection when the RH Probe is in holes over 2.4″ (6.1cm) deep.|
|RH Depth Adapter: Length with plug 1.5″ (3.4 cm)||1 unit||RH-1DA||1.50|
|RH Depth Adapter: Length with plug 1.5″ (3.4 cm)||5 pack||RH-5DA||6.00|
|RH-Adapter The 35mm stereo plug (male on both ends) connects RH BluePeg Probe directly to any Lignomat RH meter or the BL2 datalogger.|
|Adapter RH: Length of Adapter with plugs 2″ (5.1cm)||1||RH-A||23.00|
|RH Concrete Cable RH-C cable is used to connect RH BluePeg probe to a RH moisture meter or data logger. The black seal-plug is used during in-situ concrete testing. The plug fits into the sleeve, holds the RH Probe in place during measurements and prohibits air from escaping. The seal-plug also allows disconnecting the cable without removing the probe.|
|RH-CC Cable: 3.5mm stereo cable with seal- plug, standard length 6 ft, longer cables upon request.||1||RH-CC||24.00|
|RH Cable RH-C cable is used to connect RH BluePeg probe to a RH moisture meter or data logger for remote measurements. Ideal for monitoring hard to reach places where moisture may be trapped.|
|RH-C Cable: standard 3.5mm stereo cable, length 6 ft, longer cables upon request.||1||RH-C||23.00|
|Brush Sturdy brush with rounded tip to clean freshly drilled concrete holes.|
|Brush will clean up to 5″ (12.7 cm) deep holes. Total length 7.5″ (19 cm)||1||BRS||13.00|
|Vacuum Attachment Attachment for vacuum hose to clean out holes and sleeves.|
|Attachment can reach 3.5″ (8.9 cm) deep. Total length 5 3/4″ (14.6 cm)||1||V||23.00|
|Calibration Check-Salt-Solution Check solutions are available for 33% and 75% RH. The 75% solution is used to check RH probes for in-situ moisture testing of concrete. Each calibration set includes one cable with seal plug.|
|75% bottle with 1 cable with seal plug||1 set||T-75||49.00|
|3 75% bottles with 3 cables with seal plugs||3 sets||3T-75||147.00|
|1 @ 75% and 33% bottle with 2 cables with seal plugs||1 set||T-75/33||85.00|
|Case S Hard-shell case with handle and foam insert for protection. Size: 12″ x 8″ x 3.5″ (30.5 x 20.3 x 9 cm)|
|For RH meter and accessories only||1||C-S||30.00|
|For Ligno-VersaTec, RH accessories, Electrode E14||1||C-S4||30.00|
|Case M Hard-shell case with handle and foam insert for protection. Size: 13.5″ x 10″ x 3.5″ (35 x 24.5 x 9 cm)|
|For Ligno-VersaTec, RH accessories, Electrode E12||1||C-M||37.00|
|For Ligno-VersaTec, RH accessories, Electrode E12, and / or E14||1||C-M4||37.00|
|Pouch: The pouch comes with a short strap. For any mini-Ligno, Lignometer K or Ligno-VersaTec. For Electrodes E16 and/or E14. However pouch is too small for Electrode E12. Size: 11″ x 6″ x 1.5″ (28 x 15.2 x 3.8 cm)||1||P||10.00|