Lignomat USA has proven measuring technology which guarantees long-term accuracy. Measuring moisture is our expertise. Family owned since 1982.

Package D-PP

Applications

Tracking moisture problems to the source with pin and pinless meter and a Thermo-Hygrometer. For flooring inspectors, contractors and water restoration specialists. A complete surveillance kit.

 PP-professional-moisture-meter

Advantages

Select the package of your choice.
The moisture meter DX/C is versatile and comes with correction settings for domestic and tropical wood species, bamboo and building materials. The measuring range is wide enough for freshly cut to dry wood and for water damaged building materials. Kit includes a pinless meter for compare and search mode to find trouble areas. A pin meter to pin point extend of water intrusion. A Thermo-Hygrometer to check overall relative humidity and temperature conditions.

Options

  • Choose the Ligno-VersaTec, if you are looking for
    a combination meter pin – pinless – RH.

 

Components List (a) – (f) Item $ List Package $
 (a) 1 mini-Ligno DX/C, pin moisture meter D-1 199.00
 (b) 1 Inspector Electrode E14M with Cable, 1 pair EG Pins E14M 58.00 59.00
 (c) 1 Slide-hammer Electrode E12, 1 mini-BNC Cable, 1 pair each DZ and DA pins E12-MC 146.00 135.00
 (d) 1 Case for mini-Ligno DX/C and E12, E14, E16 C-M 37.00 35.00
 (e) 1 Ligno-Scanner D, pinless moisture meter D 210.00
 (f) 1 Thermo-Hygrometer TH TH 47.00
 (g) 1 Electrode E16, 1 mini-E16 Cable, 1 pair EC pins, up to 7″ deep E16-MC 52.00
 1 pair EL pins for depth probing EL pins 29.00
List of most popular Professional Packages
(a) – (e) Pin mini-Ligno DX/C, E12 and E14, pinless meter Ligno-Scanner D, in case M PD-5 427.00 405.00
(a) – (f) Pin mini-Ligno DX/C, E12 and E14, pinless meter Ligno-Scanner D, Hygrometer TH, in case M PD-6 637.00 605.00
(a) – (g) Pin mini-Ligno DX/C, E12, E14, E16, pinless meter Ligno-Scanner D, Hygrometer TH, in case M PD-7 745.00 707.00
1 pair EL pins for depth probing add EL 29.00
……………………………. ………… 

 

Moisture Meter: mini-Ligno DX/C
— Microprocessor-based circuitry assures calibration stability and
accuracy for the life-time of the meter. Calibration is internally
checked and adjusted before each reading.
— Measuring range is low enough to check hardwood floors (5%).
— Measuring range is high enough to evaluate wet lumber (65%).
— 42 Correction settings for domestic and tropical wood species
bamboo and drywall. Readings are given in percentages.
— Reference scale  for concrete and other materials (0-99).
— Integral pins and connector for external cable built-in
mini-Ligno-DXC-moisture-meter
Fast, one-hand operation. Unique shape fits comfortable in your hand when measuring. Pocket-sized. Strap keeps meter handy and safe from being dropped. Green cap serves as gun-type grip for easy probe insertion and covers the pins during transportation.
Pinless Moisture Meter: Ligno-Scanner D
— Measuring range is lower than 5% for hardwoods.
— Measuring range above 30% only quantitative.
— 71 Correction settings for domestic and tropical wood species
— Specific Gravity Settings between 0.3 – 1.0. Setting (30-100)
— Reference Scale for wood-based products.
— Microprocessor-based circuitry assures calibration stability and
accuracy for the life-time of the meter.
Calibration is internally checked and adjusted before each reading.
pinless-scan-no-lins-meter-D
A large area can be scanned in a short time without leaving pin holes. No effort is needed to insert pins in hard material. Measuring depth is crucial, only up to 3/4″ deep, for a greater depth use the electrodes E12 or E14.
Thermo-Hygrometer
— Relative humidity range 20% to 95%
— Temperature range 14°F to 122°F (-10°C to 50°C)
— Accuracy: + 5% 20% to 95%
— Clock indicates time with selectable 12 or 24 hr cycle.
— Min / Max memory with reset button+
— Built-in tilt stand and wall mounting bracket.
humidity-moisture-measurement-T
A Thermo-Hygrometer is an essential tool for keeping track and checking humidity conditions around wood products. Depending on moisture content and humidity, wood absorbs or looses moisture.
Accessories of Packages PP
Item Qty
Electrode E12 is equipped with a slide hammer to insert and extract the teflon-coated pins. A BNC connector is mounted at the electrode head to connect the cable.
The cable is detachable and included in the package as well as 2 pair pins DZ and DA.
 E12  1 depth-pin-measurement-moisture
The slim E14M has an ergonomic design to measure hard to reach problem areas fast and easy. Teflon-insulated pins measure only at the tip.
Handle can be extended.
E14M  pin-moisture-meter-restoration
Electrode E14M comes with a 3ft long cable with BNC connector and 1 pair teflon-coated EG pins for 3/4″ measuring depth.
Weight 5 oz (140g). Length without pins 6.5″ (16.5cm)
The Electrode E16 comes with two single pin probes, which are often easier to insert into hard materials and hard to reach areas than the standard 2-pin electrode. Thus the E16 is an indispensable tool for building surveillance. C-M 1  building-materials-moisture-check
Case
The black hard-shell case comes with a handle and a foam insert for protection. Designed to fit any mini-Ligno with Electrode E12.
Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9cm)
C-M 1 moisture_meter_case_M
Add – Options Item  Qty  $ List  Pkg Discounts only available at time of Package purchase
EL Pins: teflon-coated, total length 7 3/8″ (18.7cm), measuring depth of 7 1/8″ (18.1cm) EL per
pair
29.00 27.00  inspection-restoration-EL-pins
Pins for Electrode E12 DZ, DA and DB pins can only be used by Electrode E12. Teflon-coated pins measure only at the tip. depth-moisture-meter-pins-E12
DZ Pins: teflon-coated, total length 1 5/8″ (4.1cm), measuring depth of 1″ (2.5cm)  DZ per
pair
 3.50 3.32
DA Pins: teflon-coated, total length 2 1/2″ (5.4cm), measuring depth of 1 1/2″ ( 3.8cm) DA per
pair
3.75 3.56
DB Pins: teflon-coated, total length 2 5/8″ (6.7cm), measuring depth of 2″ (5cm) DB per
pair
4.00 3.80
 EL Pins: teflon-coated, total length 7 3/8″ (18.7cm), measuring depth of 7 1/8″ (18.1cm)  EL per
pair
 29.00  27.50
 ……………………………………………………………….
Spare Parts for Package D-PP
Item Qty $ List
Pins for Electrode E12 DZ, DA and DB pins can only be used by Electrode E12. Teflon-coated pins measure only at the tip. depth-moisture-meter-pins-E12
DZ Pins: teflon-coated, total length 1 5/8″ (4.1cm), measuring depth of 1″ (2.5cm) DZ per
pair
3.50
DA Pins: teflon-coated, total length 2 1/2″ (5.4cm), measuring depth of 1 1/2″ ( 3.8cm) DA per
pair
3.75
DB Pins: teflon-coated, total length 2 5/8″ (6.7cm), measuring depth of 2″ (5cm) DB per
pair
4.00
mini-BNC Cable
mini-BNC cable connects Electrode E12 to
mini-Ligno DX/C
mini-BNC cable, standard length 3ft (0.9m)
available in 6ft length
m-BNC-3 1 26.00  moisture_meters_BNC_mini_cable_b
EL Pins: teflon-coated, total length 7 3/8″ (18.7cm), measuring depth of 7 1/8″ (18.1cm) EL 1 29.00 inspection-restoration-EL-pins
…………………………………..