Lignomat moisture meters have proven measuring technology which guarantees long-term accuracy. Family owned and operated for over 40 years. 

Package V-6S

Special Prices
thru April 15, 2022.
Now is a good time to buy!


For construction, inspection and water restoration. Pin meters are the best option when deep measurements are necessary to find the source of a moisture problem.



Versatility: The Ligno-VersaTec moisture meter has a wide measuring range enabling sampling high and low moisture conditions in a wide variety of materials.

The great advantage of the Electrode E16 are the two separate, single pin probes, which are often easier to insert into hard materials and hard to reach areas than the standard 2-pin electrode. Electrode E16 has become an indispensable tool for building surveillance.


  • Add slide hammer electrode. Teflon-insulateddepth-measuring-pin-meters-21E pins allow surface / core measurements in wood floors and structural lumber to 2″ deep.


Description Item List $ Package $
Package V-6S consists of:
1 Ligno-VersaTec, pin and pinless moisture meter
1 Electrode E16, 1 pair pins each EC 5/8″ not teflon coated
V-6S 523.00 496.00
1 pair EL pins for measurements up to 7″ deep, teflon-coated add EL 29.00 27.00
1 Depth Electrode E12, 1 pair pins each DZ 1″ and DA 1.5″, BNC Cable add E12-B 153.00 150.00
1 Case up-grade from Case S to Case M, Case M fits Electrode E12 and E14 add C-MS 7.00 6.65
Ligno-VersaTec, meter only V-0 435.00
Lignometer K Inspector kit, Case S
incl. 1 Electrode E16, 1 pair EC pins 5/8″ long and E16-BNC Cable to meter
K-6S 407.00 386.00


Moisture Meter: Ligno-VersaTec – pin and pinless meter
— Microprocessor-based circuitry assures calibration stability and
accuracy for the life-time of the meter.
The calibration is internally checked and adjusted before each reading in pin and pinless mode.
— Measuring range is low enough to check kiln dried wood, hardwood floors, etc. Pinless mode allows lower readings in hard woods.
— Measuring range is high enough to evaluate green lumber (99%).
— 150 Individual correction settings for domestic and tropical wood species, bamboo and drywall. Resolution for entire range 0.1%.
— Reference scale is available for concrete and other materials (0-99).
— Connector for external electrode and RH cables built-in.
Reliable, accurate and easy to use. This top-of-the-line meter performs well in harsh environments of manufacturing plants, sawmills and lumber yards.
Accessories of Package V-6S Item Qty
Electrode E16
Used in construction, restoration, building surveillance and the hardwood flooring industry. Tapping on top of probes will drive the pins into the building material. Pre-drilling holes may be required. The mini-E16 cable is included in the package.
E16 1 moisture-meter-Eifs-Electrode-6
Electrode E16 plus 1 pair EC pins.
Weight 8 oz (260g). Length without pins 3″ (8cm)
BNC-E16 Cable connects Electrode E16 to
Ligno-Versatec or Lignometer K
m-E16 1 pin-moisture-meter-cable-NBC
Add – Options
 Item  Qty  List $  Pkg Discounts are only available
with purchase of package
EL Pins for E14 and E16: teflon-coated, total length 7 3/8″ (18.7cm), measuring depth of 7 1/8″ (18.1cm) EL per
29.00 27.00 inspection-restoration-EL-pins
The Electrode E12 is equipped with a slide hammer to insert and extract the teflon-coated pins. A BNC connector is mounted at the electrode head to connect the cable.
The BNC cable for connecting the Electrode to the moisture meter is included in item E12-B.
 E12-B 1 153.00  150.00 Depth-Electrode-pin-meter-E12
Electrode E12 plus 1 pair DZ pins, 1 pair DA pins.
Weight 8 oz (260g). Length without pins 6″ (15cm)
Case, size-up-grade P to M
Case M is big enough to fit Depth Electrode E12, E14 and/or E16 and Lignometer K or Ligno-VersaTec.
Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9 cm)
P-MS 1 27.00 25.65 moisture_meter_case_M
Pins for Electrode E12 DZ, DA and DB pins can only be used by Electrode E12. Teflon-coated pins measure only at the tip. depth-moisture-meter-pins-E12
DZ Pins: teflon-coated, total length 1 5/8″ (4.1cm), measuring depth of 1″ (2.5cm)  DZ per
 3.50 3.32
DA Pins: teflon-coated, total length 2 1/2″ (5.4cm), measuring depth of 1 1/2″ ( 3.8cm) DA per
3.75 3.56
DB Pins: teflon-coated, total length 2 5/8″ (6.7cm), measuring depth of 2″ (5cm) DB per
4.00 3.80


Spare Parts for Package V-6S
Item Qty List $
Pins for Electrode E16M EIFS-restoration-inspection-EG
EL Pins: teflon-coated, total length 7 3/8″ (18.7) cm), measuring depth of 7 1/8″ (18.1 cm) EL per
EL Pins: teflon-coated, total length 7 3/8″ (18.7) cm), measuring depth of 7 1/8″ (18.1 cm) EG per
EC Pins: un-coated, total length 15/16″ (2.3 cm), measuring depth of 5/8″ (1.6 cm) EC per
3.50  wood-pin-moisture-meter-pin-EA
EA Pins: un-coated, total length 3/4″ (1.9 cm), measuring depth of 1/2″ (1.3 cm) EA per
EV Pins: un-coated, total length 1/2″ (1.3 cm), measuring depth of 3/16″ (5 mm). Used for veneer. EA per