Lignomat moisture meters have proven measuring technology which guarantees long-term accuracy. Family owned and operated for over 40 years. 

Package V-2M

Special Prices
thru April 15, 2022.
Now is a good time to buy!

Applications

Whenever pin and pinless mode are used side by side. To keep close tabs on wood moisture during production, flooring installations, inspections, water damage repairs. The package V-2M includes all the features needed for an wood application.

 vvv

Advantages

Pin – pinless – RH: When every job is different, the Ligno-VersaTec is the most versatile meter, all-in-one. It measures moisture in a wide range of materials and in relative humidity of air. System also complies to ASTM F2170 in-situ RH concrete testing. Adding Electrode E12 allows accurate surface and core measurements with insulated pins up to 2″ deep. Industry standard for quality control of wood.

Options

  • Add Electrode E14 for water damage repair, restorationinspection-restoration-E14 and inspections. The slim Electrode E14 is designed to measure hard to reach corners, under base boards, etc.
  • Add RH BluePeg Probe to use the Ligno-VersaTec as a Thermo-Hygrometer.

 

Description Item List $ Package $
Package V-2M consists of:
1 Ligno-VersaTec moisture meter: dual-depth pinless – pin – RH
1 Electrode E12, 1 pair pins each DZ 1″ and DA 1.5″, 1 BNC Cable, 1 Case M
V-2M 632.00 614.00
1 Inspector Electrode E14V, 1 pair of pins 3/4″ teflon-coated, with cable add E14V 59.00 56.00
1 RH-BluePeg Probe with Adapter RH add RH-1B 80.00 75.00
Ligno-VersaTec, moisture meter only V-0 435.00
Ligno-VersaTec, inspector kit with RH concrete accessories V2-KM 785.00 758.00
 ………………. 

 

Moisture Meter: Ligno-VersaTec
— Microprocessor-based circuitry assures calibration stability and
— accuracy for the life-time of the meter.
— Calibration is internally checked and adjusted before each reading
 in pin and pinless mode.
— Measuring range is low enough to check kiln dried wood,
— hardwood floors, etc. Pinless mode allows lower readings
 in hardwoods.
— Moisture range high enough to check green lumber (99%).
— 150 Individual correction settings for domestic and tropical
— wood species, bamboo and drywall.
— Resolution for entire range 0.1%.
— Reference scale for concrete and other materials (0-99).
— Connector for external electrode and RH cables built-in.
wood-restoration-remediation-V
The Ligno-VersaTec combines the accurate measuring technologies of our pin, pinless and RH moisture meters.
Accessories of Package V-2M
Item Qty
Electrode E12 is equipped with a slide hammer to insert and extract the teflon-coated pins. A BNC connector is mounted at the electrode head to connect the cable.
The cable is detachable and included in the package
 E12  1 moisture_meter_Electrode_E12-parts_a
Electrode E12 plus 1 pair DZ pins and 1 pair DA pins.
Weight 8 oz (260g). Length without pins 6″ (15cm)
BNC Cable connects Electrode E12 to
–Lignometer K
–Ligno-VersaTec
BNC cable, standard length 3ft (0.9m)
 BNC-3  1 pin-moisture-meter-BNC-cable
Case
The black hard-shell case comes with a handle and a foam insert for protection. Designed to fit any mini-Ligno with Electrode E12.
Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9cm)
C-M 1  moisture_meter_case_M
Add – Options
 Item  Qty  List $  Pkg Discounts are only available
with purchase of package
 Electrode E14V has an ergonomic design to make the job of detecting moisture problems fast and easy. Teflon-insulated pins measure only at the tip. Handle can be extended. inspection-moisture-meter-E-V
Electrode E14V comes with a 3 ft long cable with BNC connector for Ligno-VersaTec and 1 pair teflon-coated EG pins for 3/4″ measuring depth. Weight 5oz (140g). Length without pins 6.5″ (16.5cm)
 EL Pins: teflon-coated, total length 7 3/8″ (18.7cm), measuring depth of 7 1/8″ (18.1cm) EL per
pair
29.00 27.00 inspection-restoration-EL-pins
 RH BluePeg Probes can be connected to the Ligno-DuoTec BW meter with Adapter H or with RH cable. Response time 8 sec. RH-1BP 1 80.00 76.00  RH-probe-precision-humidity-BP
RH: +/-2% (10-90%), +/-3% below 10%, above 90%
T: +/- 0.5°F (32-120°F) , +/- 1°F (5-32°F and 120-160°F) Response time 8 sec.
Resolution for RH and T: 0.1% and 0.1°
RH Adapter
The Adapter has 35mm stereo plugs (male) on both ends to connect RH BluePeg Probe directly to any of Lignomat’s RH meter.
RH-A  1 23.00 21.85  RH-thermo-hygrometer-humidity-Ad
Pins for Electrode E12 DZ, DA and DB pins can only be used by Electrode E12. Teflon-coated pins measure only at the tip. depth-moisture-meter-pins-E12
DZ Pins: teflon-coated, total length 1 5/8″ (4.1cm), measuring depth of 1″ (2.5cm)  DZ per
pair
 3.50 3.32
DA Pins: teflon-coated, total length 2 1/2″ (5.4cm), measuring depth of 1 1/2″ ( 3.8cm) DA per
pair
3.75 3.56
DB Pins: teflon-coated, total length 2 5/8″ (6.7cm), measuring depth of 2″ (5cm) DB per
pair
4.00 3.80
 ……………………………………………….
Spare Parts for Package V-2M
Item Qty List $
Pins for Electrode E12 DZ, DA and DB pins can only be used by Electrode E12. Teflon-coated pins measure only at the tip. depth-moisture-meter-pins-E12
DZ Pins: teflon-coated, total length 1 5/8″ (4.1cm), measuring depth of 1″ (2.5cm) DZ per
pair
3.50
DA Pins: teflon-coated, total length 2 1/2″ (5.4cm), measuring depth of 1 1/2″ ( 3.8cm) DA per
pair
3.75
DB Pins: teflon-coated, total length 2 5/8″ (6.7cm), measuring depth of 2″ (5cm) DB per
pair
4.00
BNC Cable connects Electrode E12 to
–Lignometer K
–Ligno-VersaTecBNC cable, standard length 3ft (0.9m)
available in 6ft length
BNC-3 1 23.00  pin-moisture-meter-BNC-cable
…………………………………..