Package V-3
|
Special Prices
|
Applications
|
 |
Advantages
|
Options |
|
|
|
|
|
| ……………………………………………………………………….. | …………………………………………………………… |
| Description | Item | List $ | Package $ | |||||||
| Package V-3 consists of: 1 Ligno-VersaTec moisture meter, Adapter H 3 pair PKB probes, 3 PK-H cable 12 ft (4m) |
V-3 | 470.00 | 446.00 | |||||||
| 1 Depth Electrode E12, 1 pair pins each DZ 1″ and DA 1.5″, BNC Cable | add | E12-B | 153.00 | 150.00 | ||||||
| 1 Case M, Case M fits Electrode E12 and any mini-Ligno | add | C-M | 37.00 | – | ||||||
| Ligno-VersaTec, meter only, can be used with Adapter for in-kiln measurements | V-0 | 435.00 | – | |||||||
| Pkg V2-33M: Ligno-VersaTec, E-12, pins, BNC cable, medium case, 3 pr PKB probes, 3 PK-H cables 12 ft, Adapter H, switch box and station plate | V2-33M | 929.00 | 884.00 | |||||||
| ………………… | …………. | |||||||||
| Moisture Meter: Ligno-VersaTec | |||||
| — Microprocessor-based circuitry assures calibration stability and — accuracy for the life-time of the meter. — Calibration is internally checked and adjusted before each reading — in pin and pinless mode. — Measuring range is low enough to check kiln dried wood, — hardwood floors, etc. Pinless mode allows lower readings — in hardwoods. — Moisture range high enough to check green lumber (99%). — 150 Individual correction settings for domestic and tropical — wood species, bamboo and drywall. — Resolution for entire range 0.1%. — Reference scale for concrete and other materials (0-99). — Connector for external electrode and RH cables built-in. |
 |
||||
| Reliable, accurate and easy to use. This top-of-the-line meter performs well in harsh environments of manufacturing plants, sawmills and lumber yards. | |||||
| Accessories of Package V-3 | Qty | Item | |||
| Three Cable Sets for LignoVersaTec PK Probe and cable are left in the kiln for the duration of a drying cycle. At any time the cables can be connected to the LignoVersaTec to obtain readings. |  |
||||
| 1 PK-H Cable 18 ft (6m): PKB Probe to Ligno-meter or Ligno-VersaTec 1 pair PKB probes for 4/4 to 6/4 lumber | 3 sets | PK-L | |||
| Adapter H Adapter H is needed to connect the PK-H Cables directly to the Lignometer K and the Ligno-VersaTec. Adapter H comes with a BNC connector and two posts for banana plugs (2mm mini-Cable and 4mm PK-H Cable) |
1 | A-H |  |
||
| Case M Case M is big enough to fit Depth Electrode E12, E14 and/or E16 and Lignometer K or Ligno-VersaTec. Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9 cm) | 1 | C-M |  |
||
| Add – Options | Item | Qty | List $ | Pkg | Discounts are only available with purchase of package |
| One more Cable Set PK Probe and cable are installed for the duration of a drying cycle. At any time the PK-H Cable can be connected to the Ligno-VersaTec or Lignometer K. Use Adapter H | |
||||
| 1 PK-H Cable 18 ft (6m): PKB Probe (check below for assortment of PK Probes 1 pair PKB probes for 4/4 to 6/4 lumber | PK-L | 1 set | 55.70 | 52.90 | |
| PK Probes Given length below is actual measuring depth |  |
||||
| PKA Probes: for 4/4 lumber, 1/2″ deep (1.2cm) | PKA | 1 pair | 9.25 | 8.79 | |
| PKB Probes: 3/4″ deep ( 1.9cm ), for 6/4 lumber | PKB | 1 pair | 9.75 | 9.26 | |
| PKC Probes: 1″ deep ( 2.5cm ), for 8/4 lumber | PKC | 1 pair | 10.50 | 9.98 | |
| PKD Probes: 1.5″ deep ( 3.8cm ), for 12/4 lumber | PKD | 1 pair | 12.00 | 11.40 | |
| PKE Probes: 2.75″ deep ( 7cm ) | PKE | 1 pair | 19.00 | 18.05 | |
| Spare Parts: Cables, Probes, Switchbox | Qty | Item | Price $ | |
| Adapter H Adapter H is needed to connect the PK-H Cables directly to the Lignometer K and the Ligno-VersaTec. Adapter H comes with a BNC connector and two posts for banana plugs (2mm mini-Cable and 4mm PK-H Cable) |
1 | A-H | 15.00 | |
| One Cable Set for mini-Lignos PK Probe and cable are installed for the duration of a drying cycle. At ant time the PK-mini Cable can be connected to the mini-Ligno DX/C or MD/C to obtain readings. | |
|||
| 1 PK-mini Cable 6 ft (1.80m): PKB Probe to mini-Ligno. 1 pair PKB probes for 4/4 to 6/4 lumber | 1 Set | PK-m | 38.75 | |
| PK Teflon Cables with Connectors All cables are made with high-grade teflon cable to assure accurate transmission of measured moisture values. Standard cable length for in-kiln measurements is 6ft (90cm). Longer cables can be made upon request. |  |
|||
| Cable from PK Probes to mini-Ligno C-model (6ft) | 1 | PK-m-6 | 26.00 | |
| Cable comes with connectors for mini-Ligno C’s and loops for stainless steel screws or Pins EG or EL | 1 | SS-m-6 | 22.00 | |
| Longer cable can be custom ordered, add | per ft | Tx | 1.20 | |
| PK Probes | |
|||
| PK Probes are teflon-coated for core moisture measurements. The cable is connected through a hole in the probe head for a fail-proof connection. The probes are set correctly and removed easily with the Pulling Tool #PT. | ||||
| Given length below is actual measuring depth. | ||||
| PKA Probes: for 4/4 lumber, 1/2″ deep ( 1.2cm ) | 1 pair | PKA | 10.25 | |
| PKB Probes: 3/4″ deep ( 1.9cm ), for 6/4 lumber, | 1 pair | PKB | 10.75 | |
| PKC Probes: 1″ deep ( 2.5cm ), for 8/4 lumber | 1 pair | PKC | 11.75 | |
| PKD Probes: 1.5″ deep ( 3.8cm ), for 12/4 lumber | 1 pair | PKD | 13.75 | |
| PKE Probes: 2.75″ deep ( 7cm ) | 1 pair | PKE | 19.75 | |
| Pulling Tool The Pulling Tool is used to place PK Probes correctly and to remove easily. Probe removal: The pin is threaded through the tool and the head of the PK probe. Then the probe is cork-screwed out of the board. Recommended for handling multiple PK Probes. | 1 | PT | 25.00 |  |
| EMC Humidity Measuring Station The EMC Station can be used to measure the humidity in a dry kiln, either as stand alone unit with a handheld moisture meter or as part of Lignomat’s wireless moisture monitor or Lignomat’s kiln control system. |  |
|||
| The EMC station consists of an angle connector to be mounted to the wall and an EMC holder in which the EMC wafer is installed. The EMC cellulose wafer changes with the humidity in the kiln and gives direct EMC values in percent. | ||||
| 1 EMC measuring station consists of: 1 Angle Connector 1 EMC Holder and 10 EMC wafers Connecting cable needs to be ordered separately. | 1 unit | K-EMC | 84.00 | |
| 1 EMC Holder without angle connector | 1 | K-EH | 47.00 | |
| 1 pack EMC wafers (total of 10 pieces) | 1 pack | W-10 | 10.00 | |
| Teflon Cables without Connectors Teflon cable should be used for all in-kiln wiring from switchbox to angle connector inside the kiln. Cable is available in 100 ft rolls. However, if less or more cable is needed we cut to length required. |  |
|||
| Teflon cable without connectors | per ft | Tx | 1.20 | |
| Angle connectors Angle connectors are installed along the wall inside the dry kiln. They serve as junction box for one cable coming from the switch box outside and one cable from the PK probes in the stack. | 1 | K-AC | 27.00 |  |
| 4-Station Plate The 4-Station Plate is used in smaller kilns as junction box for 4 cables from 3 (4) PK Probes and one (no) EMC station. Installation is easier and the station plate is less expensive than using 4 single angle connectors. | 1 | K-4SP | 75.00 |  |
| Switch Box The switch box is installed outside the kiln. Cables from the station plate or the angle connectors inside the kiln are wired to the switch box. The switch box is equipped with a BNC connector to directly connect the BNC cable from the Lignometer K and Ligno-VersaTec to obtain moisture readings. If a mini-Ligno DX/C or MD/C is used, the mini-BNC cable is needed to obtain readings. |  |
|||
| Switch box with 4 positions | 1 | K-SB-4 | 100.00 | |
| Switch box with 12 positions | 1 | K-SB-12 | 119.00 | |
| …………………………………………………………………….. | ………. | ………. | ……….. | …………………………………… |