Lignomat moisture meters have proven measuring technology which guarantees long-term accuracy. Family owned and operated for over 40 years. 

Package V-4S

Special Prices
thru April 15, 2022.
Now is a good time to buy!


The V-4S package is designed for inspection, construction, restoration and water damage repair jobs. Pin mode is the best option when deep measurements are necessary. Pinless mode is the best option for search and compare to detect problems 1/4″ or 3/4″ deep.



The Ligno-VersaTec is Lignomat’s most advanced with over 150 individualized wood species settings. The meter also has reference scales built-in for compare and search mode. The slim Electrode E14 is designed to measure hard to reach corners, under base boards, around window frames. Handle is extendable to reach ceilings and floors easily.


  • Add slide hammer electrode. Teflon-insulateddepth-measuring-pin-meters-21E pins allow surface / core measurements in wood floors and structural lumber to 2″ deep. Pkg: V-24M
  • Add RH BluePeg Probe to use the Ligno-VersaTec as a precision Thermo-Hygrometer.


Description Item List $ Package $
Complete Package V-4SL consists of:
1 Ligno-VersaTec, pin-pinless-RH and dual-depth moisture meter,
1 Electrode E14V, 1 pair EG pins 3/4″, 1 pair EL Pins 7″ in Case small
V-4SL 565.00 536.00
Package without EL Pins: Ligno-VersaTec, E14V, EG Pins in small Case V-4S 528.00 497.00
1 Depth Electrode E12, 1 pair pins each DZ 1″ and DA 1.5″, BNC Cable add E12-B 153.00 150.00
1 Case up-grade from Case S to Case M, Case M fits Electrode E12 and E14 add C-MS 7.00
1 RH-BluePeg Probe with Adapter RH add RH-BA 99.00 85.00
LignoVersaTec, moisture meter only V-0 435.00
LignoVersaTec Inspector kit with RH Concrete accessories, Case S
incl. 1 Electrode E14, 1 pair EG pins 3/4″ long and BNC Cable to meter
V4-KS 693.00 658.00


Moisture Meter: Ligno-VersaTec
— Microprocessor-based circuitry assures calibration stability and
— accuracy for the life-time of the meter.
— Calibration is internally checked and adjusted before each reading
 in pin and pinless mode.
— Measuring range is low enough to check kiln dried wood,
— hardwood floors, etc. Pinless mode allows lower readings
 in hardwoods.
— Moisture range high enough to check green lumber (99%).
— 150 Individual correction settings for domestic and tropical
— wood species, bamboo and drywall.
— Resolution for entire range 0.1%.
— Reference scale for concrete and other materials (0-99).
— Connector for external electrode and RH cables built-in.
The Ligno-VersaTec combines the accurate measuring technologies of our pin, pinless and RH moisture meters.
Accessories of Package V-4S
Item Qty
The slim E14 V has an ergonomic design to make the job of detecting moisture problems fast and easy. Teflon-insulated pins measure only at the tip.
Handle can be extended.
 E14V  1 inspection-moisture-meter-E14V
Electrode E14V comes with a 3ft long cable with BNC connector and 1 pair teflon-coated EG pins for 3/4″ measuring depth.
Weight 5 oz (140g). Length without pins 6.5″ (16.5cm)
The black hard-shell case comes with a handle and a foam insert for protection. Designed to fit Lignometer K and Ligno-VersaTec with Electrode E14 and Electrode E16.
Size: 12″ x 8″ x 3.5″ (30.5 x 20.3 x 9 cm)
C-S 1  moisture_meter_case_M
Add – Options
 Item  Qty  List $  Pkg Discounts are only available
with purchase of package
 EL Pins for E14 and E16: teflon-coated, total length 7 3/8″ (18.7cm), measuring depth of 7 1/8″ (18.1cm) EL per
29.00 27.00 inspection-restoration-EL-pins
RH BluePeg Probes can be connected to the Ligno-DuoTec BW meter with Adapter H or with RH cable. Response time 8 sec. RH-1BP   1   80.00 76.00  RH-probe-precision-humidity-BP
RH: +/-2% (10-90%), +/-3% below 10%, above 90%
T: +/- 0.5°F (32-120°F) , +/- 1°F (5-32°F and 120-160°F) Response time 8 sec.
Resolution for RH and T: 0.1% and 0.1°
 RH Adapter
The Adapter has 35mm stereo plugs (male) on both ends to connect RH BluePeg Probe directly to any of Lignomat’s RH meters.
 RH-A  1  23.00  21.85  RH-thermo-hygrometer-humidity-Ad
The Electrode E12 is equipped with a slide hammer to insert and extract the teflon-coated pins. A BNC connector is mounted at the electrode head to connect the cable.
The BNC cable for connecting the Electrode to the moisture meter is included in item E12-B.
 E12-B 1 153.00  150.00 Depth-Electrode-pin-meter-E12
Electrode E12 plus 1 pair DZ pins, 1 pair DA pins.
Weight 8 oz (260g). Length without pins 6″ (15cm)
Case, size-up-grade S to M
Case M is big enough to fit Depth Electrode E12, E14 and/or E16 and Lignometer K or Ligno-VersaTec.
Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9 cm)
C-MS 1 7.00 6.65 moisture_meter_case_M
Pins for Electrode E12 DZ, DA and DB pins can only be used by Electrode E12. Teflon-coated pins measure only at the tip. depth-moisture-meter-pins-E12
DZ Pins: teflon-coated, total length 1 5/8″ (4.1cm), measuring depth of 1″ (2.5cm)  DZ per
 3.50 3.32
DA Pins: teflon-coated, total length 2 1/2″ (5.4cm), measuring depth of 1 1/2″ ( 3.8cm) DA per
3.75 3.56
DB Pins: teflon-coated, total length 2 5/8″ (6.7cm), measuring depth of 2″ (5cm) DB per
4.00 3.80
Spare Parts for Package V-4S
Item Qty List $
Pins for Electrode E14V EIFS-restoration-inspection-EG
EL Pins: teflon-coated, total length 7 3/8″ (18.7) cm), measuring depth of 7 1/8″ (18.1 cm) EL per
EL Pins: teflon-coated, total length 7 3/8″ (18.7) cm), measuring depth of 7 1/8″ (18.1 cm) EG per
EC Pins: un-coated, total length 15/16″ (2.3 cm), measuring depth of 5/8″ (1.6 cm) EC per
3.50  wood-pin-moisture-meter-pin-EA
EA Pins: un-coated, total length 3/4″ (1.9 cm), measuring depth of 1/2″ (1.3 cm) EA per
EV Pins: un-coated, total length 1/2″ (1.3 cm), measuring depth of 3/16″ (5 mm). Used for veneer. EA per