Inspector Electrode E14

The Electrode E14 is designed to measure hard to reach areas in the building envelope. The slim shape allows for measuring in corners, around pipe, below window sills. The pins are teflon coated up to the Electrode handle. Therefore surface moisture is never picked-up, even if the pins are inserted all the way into the material.
The knob at the end of the Electrode E14 can be removed and replaced by a standard broom stick or paint brush handle. For measuring ceilings without ladders or carpets without bending.
To reach even further into the material for inspections and EFIS measurements we offer the EL pins which can measure up to 7″ deep.
	Electrode E14V	Electrode E14M (photo above)
	Ligno-VersaTec Lignometer K	mini-Ligno DX/C mini-Ligno S/DC	mini-Ligno MD/C

 

Electrode E14V, E14M, Pins, Cables, Case	Qty	Item	Price $
Electrode E14V for Lignometer K and Ligno-VersaTec
The slim E14 V has an ergonomic design to make the job of detecting moisture problems fast and easy. Teflon-insulated pins measure only at the tip. Handle can be extended.
Electrode E14V comes with a 3ft long cable with BNC connector and 1 pair teflon-coated EG pins for 3/4″ measuring depth. Weight 5 oz (140g). Length without pins 6.5″ (16.5cm)	1	E14V	59.00
Electrode E14M for mini-Ligno DX/C, S/DC or MD/C
The slim E14 has an ergonomic design to make the job of detecting moisture problems fast and easy. Teflon-insulated measure only at the tip. Handle can be extended.
Electrode E14M comes with a 3ft long cable with BNC connector and 1 pair teflon-coated EG pins for 3/4″ measuring depth. Weight 5 oz (140g). Length without pins 6.5″ (16.5cm)	1	E14M	58.00
Pins for Electrode E14V and E14M
EG Pins: teflon-coated, total length 1.1″ (2.8 cm), measuring depth of 3/4″ (1.9 cm)	1 pair	EG	4.50
EL Pins: teflon-coated, total length 7 3/8″ (18.7) cm), measuring depth of 7 1/8″ (18.1 cm)	1 pair	EL	29.00
EC Pins: un-coated, total length 15/16″ (2.3 cm), measuring depth of 5/8″ (1.6 cm)	1 pair	EC	3.50
EA Pins: un-coated, total length 3/4″ (1.9 cm), measuring depth of 1/2″ (1.3 cm)	1 pair	EA	3.50
EV Pins: un-coated pins, total length 1/2″ (1.3 cm), measuring depth of 3/16″ (5 mm). Used for veneer.	1 pair	EV	3.50
Cases: The hardshell case comes with a handle and foam insert for protection. Designed to fit any mini-Ligno, Lignometer K or Ligno-VersaTec with Electrodes listed below.
Case S for Electrode E14 and Electrode E16 Size: 12″ x 8″ x 3.5″ (30.5 x 20.3 x 9 cm)	1	C-S	30.00
Case M for Electrode E12, Electrode E14 and E16. Size: 13.5″ x 8″ x 3.5″ (35 x 20.3 x 9 cm)	1	C-M	35.00
Pouch: The pouch comes with a short strap. For any mini-Ligno, Lignometer K or Ligno-VersaTec. Electrodes E14 and E16 can be fitted, but pouch is too small for the Electrode E12. Size: 11″ x 6″ x 1.5″ (28 x 15.2 x 3.8 cm)	1	P	10.00
……………………………………………………………	………	………..	………..	…………………………………..